02-07-2017, 10:21 PM | #15 |
Drives: 2014 yellow 2SS/RS Join Date: Apr 2015
Location: Stoney Creek, Ontario
Posts: 488
|
Check out "xtreme racing". Search splash guard on their site. I have front and rears installed and just ordered a set for in front of the front wheels from them as well. Check my garage for photos
__________________
K&N, Borla ATAK axle back, resonator delete, Speed Engineering headers,Vitesse, Zl1 wheels, ACS rocker panels, 1LE splitter
|
02-08-2017, 08:41 AM | #16 |
Drives: 2014 2SS/RS Join Date: Dec 2014
Location: Raleigh, NC
Posts: 1,053
|
The OEM Chevy ZL1 guards are the ones I choose because they are stealth and the back ones are 3D fitted precisely molded to the existing bumper cover contour, brackets, and liner without drilling new holes and use existing mount points.
None of the other kits looked to me like they would fit as good as these. The front use a combo of existing fasteners and then drill one tiny hole in the fender margin per instructions for extra security. Found discounted on ebay couple years ago. Also made some patterns and cut/applied clear XPEL film to help out. They are stealthy and seem to disappear when viewed from side front like in pic below. Ron
__________________
2014 2SS/RS, Z28 CAI and High Wing Spoiler, ZL1 5.1:1 Ratio Short-Throw Shifter, ZL1 Pedals, ZL1 splash guards, NPP Dual-mode quad tip exhaust, Z28 strut tower brace, Camaro LED Cup-holders with footwell Lighting option, Leather visors, and Leather E-brake boot. Chevy dealer sponsored 67 retro SS nose stripe package.
Last edited by ron123; 02-08-2017 at 08:53 AM. |
02-08-2017, 09:56 AM | #17 |
Drives: 2011 SGM 1SS/RS M6 Join Date: Feb 2012
Location: New England
Posts: 255
|
I have ZL1 for the rear and have RPI designs for the front. One of my front ones just snapped though, no idea what from. I just ordered the RPI premium fronts, supposed to be a heavier plastic.
The zl1 rears are great though, fairly stealthy and work quite well.
__________________
Current: 2011 SGM Camaro 1SS/RS M6 - CAI Cold Air Kit, Janetty Tuned
|
02-08-2017, 06:47 PM | #18 |
Drives: 15 Camaro Z28 Join Date: Apr 2016
Location: ne indiana
Posts: 72
|
ron123 you have a pm.
|
05-17-2017, 11:45 AM | #19 |
Drives: 2015 2SS White Convertible CE/INDY Join Date: Mar 2016
Location: Lockport, IL
Posts: 780
|
Hey guys... I just got a set of ZL1's but I don't want to do guards. Has anyone tried any of the adhesive films out there (ala clear bra)?? I know that film would not be a permanent solution but I'd be OK replacing it once a year if needed..
joe...
__________________
ARH LTH/HFC/Legato muffler, RDP Custom Tune, K&N Blackhawk CAI, Bigworm Blackout kit, ZL1 Rims, Phantom Grills, VMAX PTB
|
05-17-2017, 12:13 PM | #20 |
Instagram: Sangstah
|
Love my ZL1Addons rockguards, super subtle and get the job done well
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
07-12-2017, 06:07 PM | #21 |
Drives: 2015 Camaro SS Join Date: May 2016
Location: NH
Posts: 7
|
I went with the RPI ones on my 2014 but the person who installed them for me didn't care for the brackets that needed to be installed with the front guards, and neither did I as they clipped onto the wheel well and paint.
Do the ZL1Addon guards have clips? I have a 2015 now and need rockguards. |
07-12-2017, 06:24 PM | #22 |
ultracrepidarianism
Drives: '14 1SS/RS/1LE/NPP '18 Accord Sport Join Date: Mar 2014
Location: where folks drive like shit
Posts: 1,297
|
__________________
|
07-12-2017, 09:46 PM | #23 |
Account Suspended
Drives: Camaro V6 Join Date: Oct 2016
Location: U.S.
Posts: 1,722
|
On mine, I had the Husky front and the ZL1 rear, but I changed out the fronts for custom made versions that I made myself. I extended them down even further to protect the lower rockers as well.
|
|
|
|
|