08-10-2022, 02:55 PM | #15 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Agree the bead locks are the cat meow but if you don't want to spend 1200 a wheel then this is what MT recommended to me on the Tech Line. I've done this on the last 5 sets of drag radials and 1 set of Hoosier since I couldn't drill the hole in the right place on the Race Star Wheels and I've never had any movement in the tire on the wheel. I always mark the tire and stem to make sure it doesn't move.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
08-10-2022, 03:02 PM | #16 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
Got them from drag racing wheels.com lightweight wheels and look like they’re decent from what I’ve read about them.
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
08-10-2022, 03:07 PM | #17 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Willy can you post a pic of your wheels that you bought.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
08-10-2022, 03:53 PM | #18 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
08-10-2022, 04:01 PM | #19 | |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
Quote:
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
|
08-10-2022, 04:06 PM | #20 | |
Drives: 2020 Camaro ZL1 Join Date: Oct 2020
Location: Fort Worth, Texas
Posts: 1,135
|
Quote:
__________________
2020 ZL1 A10 Shadow Gray Metallic
Magnuson Magnum DI TVS2650R| Mamo Throttle Body V2| RotoFab Intake| Borla S-Type Catback Exhaust| TCM Tune| Tune| Eibach Pro| BMR Rear Cradle Lockout| PPF| Ceramic| BCForged HCS21 |
|
08-10-2022, 06:40 PM | #21 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
|
ET Street R is a DOT-approved drag radial.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
08-11-2022, 09:43 AM | #22 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,793
|
Yep...and the street tears them up fast. They are designed mainly for the track with light street use.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
09-30-2022, 04:33 PM | #23 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
What tire pressure are you guys running for the ET Street R?
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
09-30-2022, 06:11 PM | #24 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,741
|
I try to run 18 psi at the track. Sometimes I have to go a bit less based on track conditions. But your power level, how hard you launch, temps, etc all play a role too.
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
09-30-2022, 06:19 PM | #25 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
My zl1 is pretty much stock, minus a CAI so guessing more like low 20s
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
09-30-2022, 06:57 PM | #26 |
Drives: 2017 Chevrolet Camaro ZL1 M6 Join Date: Jul 2020
Location: OR
Posts: 479
|
Don't mean to be a show off, but don't these look better? And glue be damned!
__________________
JRE Terminator Rough Idle Cam
Magnuson 2650 - 15% lower, 90mm upper FIC+30% DSX Flex fuel/Low side NW 103mm TB/Roto-Fab CAI Monster S Series Elite E2-X 2" TSP LT's BMR:BK063, BK060,TCA061, UTCA060, UTCA063 Weld Beadlocks/17" NT5R2 |
09-30-2022, 08:32 PM | #27 |
Drives: '20 ZLE Join Date: Jun 2020
Location: Mile High
Posts: 3,556
|
I've got but am not using the F14 beadlocks https://www.jegs.com/i/Forgestar+Whe...RoC1m0QAvD_BwE
My MT ET Street R wobbled like crazy so I sold them. Using Toyo R888R 325 on OEM wheels and changing to 345.
__________________
'20 ZL1 1LE A10,
OEM short block, LME heads/valve train, E2650. 100+ octanes, no eth, no meth, no N2O. 2/23 - 1031/1004 wheel. 4/23 - 1.41/9.61/145 at DA 7000 ft. (only made five passes). 2/24 - LME 390, E2650, FBO, 100 oct.; 1116hp/ 1063tq; 109 oct. dyno next. |
09-30-2022, 09:42 PM | #28 |
Drives: 18 zl1 garnet red Join Date: Aug 2021
Location: TX
Posts: 287
|
If I had some more HP I would justify spending more but mine in stock form I couldn’t justify beadlocks. Those do look nasty though
__________________
IG - @zl1_will
2022 zl1 740hp / 730tq stolen 2018 zl1 Maggie - 2" headers - flex fuel - lowside fuel ssytem - +30 injectors - cordes ice tank - spl rear linkage arms |
|
|
Post Reply
|
|
|