01-20-2020, 12:37 PM | #15 |
Drives: 2019 ZL1 Crush Join Date: Jan 2019
Location: Colorado Springs
Posts: 564
|
Very nice, thanks!!!
__________________
2019 Crush A10
E-Force 2650 670WHP 615WTQ All besides the 2650 is bone stock down to the air filter. |
01-21-2020, 01:46 PM | #16 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
Any chance you weighed these wheels before install?
|
01-21-2020, 08:19 PM | #17 |
Drives: 2019 ZL1 1LE A10 Join Date: Jan 2015
Location: The ATX
Posts: 966
|
Those look fantastic!
__________________
Ryker #29
2019 ZL1 1LE A10 2015 Z/28 #809 |
01-22-2020, 08:41 AM | #18 |
Drives: 2017 Camaro ZL1 Join Date: Aug 2018
Location: Bel Air, MD
Posts: 319
|
Front Wheel Specs: 19x11.0 +11 (21.6 lbs)
Rear Wheel Specs: 19x12.0 +41 (21.9 lbs)
__________________
'17 Camaro ZL1 M6
|
01-22-2020, 08:59 AM | #19 |
Drives: 2021 Camaro SS 1LE Join Date: May 2009
Location: NM
Posts: 892
|
Those look perfect!
__________________
2021 Camaro 1SS 1LE - Red Hot
2015 Camaro Z/28 - Red Hot 2001 Mecham Trans Am #3 - 7.0L LS1 |
01-22-2020, 09:23 AM | #20 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
|
01-23-2020, 08:55 AM | #21 |
Drives: 22 ZL1, 20 Taco, 20 Cayenne S Join Date: Oct 2019
Location: MN
Posts: 624
|
Piling on, but very very nice looking! I've been tempted to go the BC Forged route, but I've never seen many reviews about how they hold up to track abuse. With heavy cars like the ZL1s etc I've been nervous to go with them for track duty. The prices and looks are very attractive though.
|
01-23-2020, 05:10 PM | #22 |
Drives: '19 RivrsdBlu 1LE ('17 1LE HB sold) Join Date: Nov 2016
Location: Seattle
Posts: 1,686
|
Great looking wheels , congrats!
May I ask what kind of camber are you currently running (front and rear) ?
__________________
|
01-23-2020, 06:14 PM | #23 | |
Drives: 2019 Chevy Camaro ZL1 M6 Join Date: Jul 2019
Location: Sea level
Posts: 1,254
|
Quote:
Any idea if the poke could be adjusted out of the front with a slightly different offset? Or would that create issue on the inside of the wheel? |
|
01-30-2020, 10:01 AM | #24 |
Drives: 2017 Camaro ZL1 NightFall Grey A10 Join Date: Dec 2017
Location: N. Nevada
Posts: 25
|
stock camber
Thanks to all. Really enjoying the new shoes.
I am running stock camber many other posts have dealt with camber for this setup so i would defer to them so far, no rubbing, issues at all. grip is tight; car feels more responsive etc etc. all subjective I know but bottom line, i love the look and setup. slight poke is no issue for me i think if you offset further you will have issues inside but again, many others have dealt with this topic |
01-30-2020, 01:56 PM | #25 |
Drives: 2019 ZL1 Join Date: Aug 2018
Location: Rio Rancho, NM
Posts: 81
|
I have the same tires and front wheel spec, I can tell you -3.2 front camber removes the "poke" look.
|
09-02-2021, 07:27 AM | #26 |
Drives: Chevy Camaro ZL1 Join Date: Apr 2021
Location: KY
Posts: 14
|
I have a set of these in matte black with Falken RT660s mounted for sale. The whole setup was used for 2 sessions at Mid Ohio. They're basically brand new and are fantastic, but I just sold the car and have no use for them.
https://www.camaro6.com/forums/showthread.php?t=596747 This really is the best looking setup I've seen on a ZL1, and honestly this thread is why I bought them. |
|
|
Post Reply
|
|
|