You are browsing camaro6 
07-05-2020, 07:23 AM
|
#1 |
 
Drives: 2022 Camaro LT1 Join Date: Jun 2010
Location: new brunswick
Posts: 328
|
17" Z06 wheels
Just want to confirm if the 17" z06 wheels will fit the rear of a 2016 camaro SS. Tried the search but seen lots of info on the 18" but not the 17".
__________________
2024 Shark Skin Metallic LT1 On order
2022 Equinox LT |
|
|
|
07-05-2020, 12:00 PM
|
#2 |
     Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Can you post pics with the wheels on your car?
Some numbers to go with your results: C7 Z06 front wheel (Black with machined groove) #23251387 Center bore per GM 2.76” (70.104mm) 19x10 ET 43mm Listed weight of 25.7lbs. 285/30ZR19 (87Y) SL Michelin® Pilot® Super Sport® ZP MSRP $745 https://accessories.chevrolet.com/pr...egoryId=106001 C7 Z06 rear wheel (Black with machined groove) #23319267 Center bore per GM 2.76” (70.104mm) 20x12 ET 59mm Listed weight of 31.8lbs. 335/25ZR20 (87Y) SL Michelin® Pilot® Super Sport® Z MSRP $800 https://accessories.chevrolet.com/pr...egoryId=106001
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
|
|
|
|
07-05-2020, 04:10 PM
|
#3 |
Drives: Chevrolet SS 1LE Join Date: Oct 2019
Location: St. Charles, MO
Posts: 1,446
|
The only 17" Z06 wheels, ever, were the C5 Z06 fronts. They were 17x9.5 and had 54mm offset, which is too much offset for a camaro6. I believe they will bolt up and not touch anything (they still have less backspacing than 1LE rear wheels), but they will look narrow because they will sit almost 1/3" farther inboard than your stock 20x9.5 et39 wheels.
ETA: Oops, I forgot that those Z06 wheels have a slightly different bolt pattern: 5x120.65" vs our 5x120". There's a raging webernets war about whether those are really safe to interchange or not. I wouldn't do it.
__________________
Matt Miller
2020 SS 1LE |
|
|
|
|
07-05-2020, 05:46 PM
|
#4 |
|
Drives: 2022 Camaro LT1 Join Date: Jun 2010
Location: new brunswick
Posts: 328
|
Trochoidal: I don't have them yet, looking to do a cheap 17" rear drag wheel setup and there was a set in my area for sale and thought I might grab them. Might have to grind on the caliper a bit but they were sold anyways.
Msquared: thanks for the info
__________________
2024 Shark Skin Metallic LT1 On order
2022 Equinox LT |
|
|
|
|
07-05-2020, 05:59 PM
|
#5 | |
|
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Quote:
 Sorry man!
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
