Gen5DIY lcd rear view mirror with harness - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Pearlj10 · 02-15-2021, 02:48 PM

SOLD!
Perfect condition, with harness. Fits 2010-2011 models. Only used a couple of months before upgrading to PAC unit. I can throw in a GM camera modified to fit trunk plug cap if desired. These are $519 new. I’m asking $250 for basically a new Lcd mirror and harness plus a free camera if you want it. Thanks

larry_g · 02-15-2021, 03:49 PM

So this gives you a backup camera in the mirror? Definitely interested.

Dang, the website says 10-11 only. Good deal for somebody.

Sent from my Pixel 5 using Tapatalk

Pearlj10 · 02-15-2021, 08:05 PM

Good catch on the model years, Larry. I called Gen5DIY this morning and he said you’d need the cutout with plastic plug in bumper to run the harness I have. Otherwise, you’d have to buy a new rear harness (but not front harness or mirror) from him with corresponding camera for a total cost of $85. I’m more than willing to negotiate or sell just the lcd mirror if anyone is interested.

02-15-2021, 02:48 PM	#1
Pearlj10 Drives: 2011 Camaro 2LT Join Date: Oct 2018 Location: Az Posts: 367	Gen5DIY lcd rear view mirror with harness SOLD! Perfect condition, with harness. Fits 2010-2011 models. Only used a couple of months before upgrading to PAC unit. I can throw in a GM camera modified to fit trunk plug cap if desired. These are $519 new. I’m asking $250 for basically a new Lcd mirror and harness plus a free camera if you want it. Thanks Attached Images Last edited by Pearlj10; 02-23-2021 at 10:38 PM. Reason: Sold

02-15-2021, 03:49 PM	#2
larry_g Drives: 2014 1SS/1LE Join Date: Nov 2015 Location: Louisville, KY Posts: 826	So this gives you a backup camera in the mirror? Definitely interested. Dang, the website says 10-11 only. Good deal for somebody. Sent from my Pixel 5 using Tapatalk __________________ 830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.

02-15-2021, 08:05 PM	#3
Pearlj10 Drives: 2011 Camaro 2LT Join Date: Oct 2018 Location: Az Posts: 367	Good catch on the model years, Larry. I called Gen5DIY this morning and he said you’d need the cutout with plastic plug in bumper to run the harness I have. Otherwise, you’d have to buy a new rear harness (but not front harness or mirror) from him with corresponding camera for a total cost of $85. I’m more than willing to negotiate or sell just the lcd mirror if anyone is interested. Last edited by Pearlj10; 02-17-2021 at 07:37 PM.