[900RFWN]

Hey folks, I recently encountered some flying road debris that cracked this plastic piece. I tried looking on gmpartsdirect but didn't see it listed there and I'm hoping someone can help me. That moth was pretty damn strong.

[SpazmXylam]

try looking for cooler duct? A chance it is part of the bumper cover. Those look like staples up at the top.
Also, looks like you are lucky it didnt puncture the cooler too.

[DevilsReject97]

Fairly certain that's the inner fender liner...

https://www.gmpartsonline.net/oem-pa...Y4LWdhcw%3D%3D

You might message 2010RedSS

https://www.camaro6.com/forums/showthread.php?t=522974

[900RFWN]

try looking for cooler duct? A chance it is part of the bumper cover. Those look like staples up at the top.
Also, looks like you are lucky it didnt puncture the cooler too.

I did get lucky. Anywhere else in there or the outside bumper, grill, headlight area and it would have been worse. My first instinct was to look for bumper parts but it doesn't look like that is in there. Searching for 'air deflector' or similar wording gets me no where.

Fairly certain that's the inner fender liner...

https://www.gmpartsonline.net/oem-pa...Y4LWdhcw%3D%3D

You might message 2010RedSS

https://www.camaro6.com/forums/showthread.php?t=522974

I had my eye on the fender liner as well but now that I looked at that thread the liner is composed of a softer material kind of like that found on the hood liners. This is hard plastic. What makes things difficult is that gmpartsdirect just has a drawing of the item from one single angle. Most of the time that is enough but in this case a 3D view would be great.


Here is a link to another part I'm looking hard at.


https://www.gmpartsdirect.com/oem-pa...Y4LWdhcw%3D%3D


I'm just going by what I see in those drawings and there is a cooler right next to that #10 piece. I could be way off though.