[ssmike]

I just drove my newly purchased ‘16 2SS M6 home today and after an hour cruising on the interstate in touring mode I noticed that the brakes would grab when I came to a complete stop after exiting. There was a vibration also and the after a few stops I got a brief Service Brake Assist warning. It cleared and didn’t come back but the brakes still were grabbing. It was a wet rainy drive home if that matters. When I got home I shut it off for a while. I then started it up and drove around with no problem, brakes were perfect. Anyone ever experience this? I saw an old thread about this but the guy never posted a resolution.

[ssmike]

I just found another thread of the same problem. http://www.camaro6.com/forums/showthread.php?t=459802

[Kise]

ive experienced this a few times after about 30 minutes of city driving. almost crashed about 2 week ago from this.

[DetCam]

According to this post, there is a bulletin on it and a fix:

http://www.camaro6.com/forums/showthread.php?t=485938

[Kise]

Originally Posted by DetCam

According to this post, there is a bulletin on it and a fix:

http://www.camaro6.com/forums/showthread.php?t=485938

dealers and GM tell me that they need to recreate the issue in order to provide a fix.

petty considering it has only happened twice.

[whitelightning011]

Originally Posted by Kise

dealers and GM tell me that they need to recreate the issue in order to provide a fix.

petty considering it has only happened twice.

So you didn't get the dealer to budge in reprogramming anything on the vehicle? I've had my dealer tell me the same story, that they need to recreate it since the code went away. It's really disconcerting. I need to get them to agree to follow the TSB because this is a safety concern.