[SaldalaPerformance]

Kill switch for fuel system on 2016+ SS, SS 1LE, ZL1, & ZL1 1LE
How the switch works:
The toggle switch acts as a disconnect for the fuel pump wiring. When the switch is in the off
position, the car will continuously crank without starting up.
If the car was recently on prior to attempting to start the car with the switch off, the car will
likely turn on and run until the fuel empties out of the line, this is approximately 3 seconds or
so.
The intention of the switch is to prevent thieves from driving your car away. MAKE SURE to
turn the switch back ON before attempting to drive the car so it won’t give you a CEL.
If you or a thief attempts to turn on the vehicle with the switch in the OFF position, the car will
issue a CEL. Just use a obd2 code reader and clear the code and continue with your day.
Items needed:
Toggle switch
16ga wiring
Butt connectors
Electrical tape
Wire cutters
Wire strippers
Wire crimps
Wire loom
Drill and drill bit (to mount in a specific spot, not needed if using an existing hole.)
The wiring diagram can be found here :
https://www.camaro6.com/forums/attac...4&d=1669240808

[Deacon Blues]

Very much appreciated information, thank you for such a detailed guide. Anything we can do to stop these thieves is welcomed!

[david_acm]

Neat thanks for the info! I have a couple questions that I hope you can answer.

When I unlock the car, I hear what I assumed was the fuel pump working for a few seconds before starting the car. If this is true, do you have to turn on the fuel pump and let it run for a few seconds before starting the car, or is the noise I'm describing related to something else?

[Caerus]

Great first post contribution to the forum. Thanks.

[SaldalaPerformance]

Originally Posted by david_acm

Neat thanks for the info! I have a couple questions that I hope you can answer.

When I unlock the car, I hear what I assumed was the fuel pump working for a few seconds before starting the car. If this is true, do you have to turn on the fuel pump and let it run for a few seconds before starting the car, or is the noise I'm describing related to something else?

No. Just flip the switch on if you want to drive the car. No need to prime anything.
I’ve been using this for over 6 months now with no issues. I also am FBO e85 and track the car heavily.

[david_acm]

Sweet, thanks again!

[He11bent]

Another option

https://www.mobilistics.com/nostart-...p-immobilizer/