You are browsing camaro6 
05-10-2021, 12:48 PM
|
#1 |
|
2018 Convertible ZL1
|
ZL1 stock spoiler swap
I purchased a used stock ZL1 desk lid and spoiler on the net, anyone know where to get the 3m tape gaskets that sit between spoiler and deck lid? I had the spoiler painted to match my color scheme but need to put everything back together. Called the dealer and they were no help. Help please!!!
|
|
|
|
05-10-2021, 05:40 PM
|
#2 |
            
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,605
|
It's unlikely to have a separate part number. I'd just buy a butyl strip or patch, something similar to this one, and trim it to fit. This is the same material these OEM spoiler gaskets are made from.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
05-10-2021, 09:19 PM
|
#3 |
|
2018 Convertible ZL1
|
Thanks I will take a look.
|
|
|
|
|
05-13-2021, 01:51 PM
|
#4 |
 Drives: 2016 hyper blue 2ss Join Date: Nov 2017
Location: Roanoke, VA
Posts: 82
|
I just put 3m tape over the holes and cut holes
for the bolts to go through. Been on a year with no leaks.
__________________
2016 HBM 2ss m6 with MRC and NPP
1992 mr2 turbo m5 |
|
|
|
|
05-13-2021, 04:18 PM
|
#5 |
 
Drives: Chevrolet Camaro 2SS Join Date: Nov 2019
Location: Tennessee
Posts: 126
|
Do not just put the spoiler on without them!! I made that mistake and used just double sided tape as a temp solution and I found an inch and a half of water in my trunk one day...
|
|
|
|
|
05-27-2021, 08:17 PM
|
#6 |
 
Drives: 2022 Camaro 1SS Redline Join Date: Nov 2019
Location: MD
Posts: 297
|
I’m pretty sure the 3M double sided tape pads for the spoiler have their own part number. I’m seen them in the parts list for Spoiler components on one of the online places like GM Parts Direct or Cultrag.
__________________
2022 Camaro 1SS A10 Black, Redline Edition - SOLD
|
|
|
|
|
|
|
|
|
Post Reply
|
|
|
