06-16-2022, 10:02 AM | #1 |
Drives: 2020 ZL1 1LE A10 Join Date: Feb 2021
Location: Lutz, FL
Posts: 76
|
Looking for stock NPP muffler (ZL1 - flared tips)
I know many have removed the stock muffler in favor of aftermarket. Only looking for ZL1 with flared exhaust tips. If anyone is looking to get rid of theirs, I'm very interested. I'm located in Lutz, FL for those willing to ship
Thanks, Mark |
06-16-2022, 10:19 AM | #2 |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
Do you have an exhaust to trade? I have my stock NPP but its on the car and I would need another axleback to put on in its place. Mine is a 21 with 2600 miles on it. And Im down the street from you in LOL.
|
06-16-2022, 11:08 AM | #3 |
Drives: 2020 ZL1 1LE A10 Join Date: Feb 2021
Location: Lutz, FL
Posts: 76
|
Why yes I do if you're interested. I have a Borla Atak with powder coated black tips. My car is fully built now and the Exhaust can get a bit loud. When the car was stock, the exhaust wasn't bad at all.
|
06-16-2022, 11:13 AM | #4 | |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
Quote:
I feel you though. I had to do the same with my C6. I had B&B bullets axleback on it and when I did the headers, it was NASCAR loud. I had to swap on some corsa sports and even those were screaming. I think I'll have to pass. But let me know if you are doing any car shows around. And if you see me in my SHOCK colored ZL1, say hi. |
|
06-16-2022, 11:26 AM | #5 |
Drives: 2020 ZL1 1LE A10 Join Date: Feb 2021
Location: Lutz, FL
Posts: 76
|
Joe is my guy!! He built my '20 ZL1 1LE.
Made 855 to the rear. He refers to me as "The Hulk". He'll know me very well and can tell you all about my car. He also did my '10 ZR1 that made close to 900. Joe is the man and I wouldn't take my car anywhere else. |
06-20-2022, 03:48 AM | #6 |
Drives: Chevy Camaro 2016 2SS Join Date: Feb 2022
Location: Orlando, FL
Posts: 11
|
I have the 2SS NPP stock axel back if you're interested in that
|
06-20-2022, 12:09 PM | #7 |
Drives: 2020 ZL1 1LE A10 Join Date: Feb 2021
Location: Lutz, FL
Posts: 76
|
|
07-02-2022, 10:03 AM | #8 |
Drives: 2018 Camaro ZL1 1LE Join Date: May 2022
Location: Midwest
Posts: 41
|
I don't know what flared tips are but I have ZLE Catback that was just replaced by AWE. I made post above in this forum.
|
07-03-2022, 10:07 PM | #9 |
Drives: Chevy Camaro 2016 2SS Join Date: Feb 2022
Location: Orlando, FL
Posts: 11
|
Hey when I get home Tuesday I will check the tips out and try to send a picture over to you to view and let me know!
|
07-03-2022, 10:33 PM | #10 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,496
|
If it's a 2SS, it certainly has the standard, smaller diameter GM tips, not the flared ZL1 ones.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
10-02-2022, 03:06 PM | #11 |
Account Suspended
Drives: 21 ZL1 Join Date: Feb 2022
Location: South East
Posts: 662
|
Just PMd you man. Im local to you Land O Lakes and willing to trade now if you want?
|
|
|
Post Reply
|
Thread Tools | |
|
|