11-29-2018, 04:38 PM | #1 |
Drives: 2018 Camaro 1SS Join Date: Aug 2018
Location: Greensboro, NC
Posts: 3
|
Dashcam Wiring Not Enough Power?
So I have a Vantrue T2 and the Gen5DIY radar kit with the optional leads added. For the past month I have been trying to get power to my dash cam and nothing is working. I tried wiring it in directly with the Gen5DIY kit; no power. I got the actual Vantrue hardwire kit with the converter built in, wired that to the Gen5DIY kit; no power. Visually inspected the Gen5DIY kit, it looks fine; I replaced the Vantrue kit with a new one and still cannot get power. If I use the OBD2 port, cigarette lighter port, or external battery they all give the dashcam power. Any suggestions? I think I would see something wrong if it was the Gen5DIY kit but I am at a complete loss.
|
11-30-2018, 08:49 AM | #2 |
Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008
Location: By the lake in AZ
Posts: 15,719
|
Pm sent.
|
11-30-2018, 09:00 AM | #3 |
Drives: '19 2SS M6. Join Date: Aug 2018
Location: CT
Posts: 340
|
I have a hard wire kit and want to tap it into the cigarette lighter wires.
How do you pull that center console to gain access without breaking stuff?
__________________
2019 2SS, Shadow gray, 6mt, NPP, Magneride, Bose.
|
|
|
Post Reply
|
|
|