You are browsing camaro5 
 |
|
05-24-2012, 01:12 PM
|
#1 |
|
GrINned & JUICEd
Drives: 15STI, 10Expy, 10 2SS/RS M6, 47KB1 Join Date: Nov 2009
Location: Pittsburgh, PA
Posts: 1,247
|
What can I do to have my A-pillars match?
How can I make my A-pillars match color and texure? I have a Fesler's dual guage pillar pod, driver's side, and the factory A-pillar trim on the passenger's side. The fact that the texture and color are different bothers me. I want them to match each other. So I talked with a local shop about getting it wrapped, he said to many curve's for the wrap. True or not?
I asked him about hydro dipping, he said it may work but he doesn't do it. If hydro'd, would the pillars need sanded down to remove the texture. I guess I could always sand and paint both to match. Pictures and suggestions would be helpful.
__________________
GPI SS3 Cam & stuff,N.O. Plate(dedicated fuel tank,progressive,fuel hose upgrade,remote opener,heater,console switches),LNC2000,CTAP,ARH 1 7/8" LTs/gutted cats/X pipe/mufflers,Jet Hot coated LTs,GPI HPT Tune,CAI, Scoop,Rx Catch Can,Gates heater hose relocation, Remote clutch & auto brake res,Metco loop,Momentum Tunnel Brace,TSW Nurb 18",555 & 05,Pfadt trailing arms & toe rods,Autometer WB,Fesler Pillar Pod,LED strips (int),Lloyds floor & trunk mats,LED DRL/front turn & license plate,DRL harness,VLEDs tail lights,Plasticoat Bowties. Ord: Oct 5, 2009 Rec: Nov 19, 2009 13.17@112.6 stock
|
|
|
 |
|
|
