Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction Discussions


BeckyD @ James Martin Chevy


Post Reply
 
Thread Tools
Old 09-16-2023, 11:26 AM   #1
Kerry

 
Drives: 2019 2SS Camaro
Join Date: Apr 2012
Location: Al
Posts: 828
Plug Read

New plugs 5 min warmup then wide open 3rd and 4th shut down. What does everyone think how they look?

Plugs are 13572468
Attached Images
  
Kerry is offline   Reply With Quote
Old 09-16-2023, 11:59 AM   #2
CalgaryZL1

 
CalgaryZL1's Avatar
 
Drives: 2020 Chevy Camaro ZL1
Join Date: Apr 2023
Location: Calgary Canada
Posts: 1,398
The second one from the left looks a little lean, but with out close up photos and very little runtime, hard to tell
CalgaryZL1 is offline   Reply With Quote
Old 09-17-2023, 08:43 AM   #3
KingLT1


 
KingLT1's Avatar
 
Drives: 2016 1SS NFG A8
Join Date: Aug 2017
Location: 46804
Posts: 6,764
Can't really tell...the pics are too blurry.

If you are wanting to know rich or lean for WOT afr, you need to cut the threads off so you can see the bottom of the electrode porcelain. Bottom reading is wot afr, top is part throttle afr. Can't really see the ground straps to determine if the timing is in a good range. Heat range looks a touch hot.

I would suggest a TR-7ix at your power level and compression imo.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP
Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP
Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA
KingLT1 is offline   Reply With Quote
 
Post Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:24 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.