10-16-2020, 12:21 AM | #1 |
Drives: 2017 ZL1 Join Date: Aug 2020
Location: Lakeside, Az
Posts: 491
|
Any positive results with aftermarket sc lids?
I see NX and weapon x have some out with claims of better cooling and 25 more hp.
Any validity to these claims from folks who have used them or know someone who has? |
10-16-2020, 05:57 AM | #2 |
Oh Oh it's Friday Night!
Drives: 2018 ZL1 1LE Nightfall Gray Join Date: Jan 2018
Location: Walton Woods
Posts: 1,061
|
I noticed absolutely zero performance difference after I installed my lid. It does seem to run consistently cooler, at highway speeds regardless of the weather. I have observed my coolant 2 degrees cooler than with the factory SC cover, and my intake temp slightly cooler under most driving conditions. But I can not quantify it, never thought of doing a before and after. What I do know for sure is the NX lid significantly increased SC whine and is a great visual mod. Expensive bling for looks and sound. No seat of pants performance difference whatsoever.
__________________
2018 Camaro ZL1 1LE NFG; ARH 2” headers, catless mids, ARH full exhaust, Lingenfelter 18% lower pulley, ATI Harmonic Balancer, Roto-fab CAI, EE-catch can, TM ported TB, NX Lid, BMR strut tower brace. Aeroforce dual pod interceptor gauges. Tuned by Vengeance Racing!!! 644 HP @ 6250 rpm / 689 trq @ 3660 rpm
Four that wanna own me Two that wanna stone me One says she's a friend of mine... |
10-16-2020, 07:44 AM | #3 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
In my non-scientific experiment at VIR... I felt like I may have even lost a little bit. The supercharger sounds much better but that was not worth the expense. If you're going to spend the money then get the stock supercharger ported.
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
10-17-2020, 11:27 AM | #4 |
Drives: 18 ZL1-1LE, 10 JKU Join Date: Jul 2018
Location: AR
Posts: 585
|
I think anything increasing airflow on these cars without a tune, the computer adjusts and it’s all for nothing. Just my opinion, but i bet my car would run better without my TB and rotofab lol.
|
10-17-2020, 12:14 PM | #5 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
These guys have a pretty good looking new lid too:
https://www.facebook.com/watch/?v=1707977092686909
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
10-17-2020, 01:29 PM | #6 | |
Drives: 19' ZL1 A10, w/pdr Join Date: Sep 2014
Location: S.W. ohio
Posts: 1,551
|
Quote:
__________________
BTR Stg II cam w/ 38% fuel lobe, ARH 2" headers into 3" w/cats, AWE Touring, Kong X port, Weapon X triple ht exchangers, NW 103, Rotofab big gulp, DSX lowside, TCM tune, BMR Lockout, Mustang dyno 720 rwhp, 634 rwtq on 93 pump.
|
|
10-17-2020, 03:16 PM | #7 |
Drives: 2017 Camero ZL1 Join Date: Nov 2015
Location: Texas
Posts: 130
|
It's already out. Costs $1200 IIRC and it's just a lid with no meth or nitrous provisions. They claim 40 horsepower gains and tune required but no third party has tested it yet.
__________________
2017 ZL1 A10
Dyno/Quarter Mile/Dragy 9.71@141.2 MPH so far. 2007 Z06 H/C/I/E Half Mile - 169 MPH. Sold. |
10-17-2020, 03:35 PM | #8 |
Account Suspended
Drives: '21 Wild Cherry ZL1 Join Date: Aug 2018
Location: WI
Posts: 2,082
|
|
10-17-2020, 03:39 PM | #9 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
If the LMP or weapon X help with cooling and volume this might be a good buy. Just depends on price. Ported SC is about 1500. If the lid is about $1000+ it might be just a couple grand shy of Mag 2650 which would be the better route.
|
10-17-2020, 11:11 PM | #10 |
Drives: 2019 Camaro ZL1 M6 Join Date: Nov 2018
Location: Fort Lauderdale, FL
Posts: 87
|
Yeah. These lids seem overpriced without much proof of actual gains. If you’re dead set on staying with the factory blower it might worth adding, but at the total cost of porting + lid you might as well get a 2300 for a little bit more and get better cooling and performance.
Now, if the lids were 400-500 it would be worth it. |
10-18-2020, 12:42 AM | #11 |
Drives: 2017 ZL1 Join Date: Aug 2020
Location: Lakeside, Az
Posts: 491
|
It appears when they first came out they were $700-$800.
I just got a price request back from NX for $1300. Holy crap. No thanks. |
10-18-2020, 07:19 AM | #12 | |
Quote:
__________________
2018 ZL1-NFG-A10
New Iron L8T 9.32 147MPH |
||
10-20-2020, 12:45 PM | #13 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
|
10-20-2020, 12:56 PM | #14 |
Drives: 2019 ZL1 Join Date: Oct 2019
Location: GA
Posts: 573
|
|
|
|
Post Reply
|
|
|