Anderson Composites - Page 4

CyberGuyPR · 05-22-2017, 07:13 AM

I just finished my install. Pull bumper cover off the car, Lethalcamaro's video comes handy for this. Pull out the taillights. Transfer the reflectors to the new diffuser piece. Remove stock diffuser from bumper by pulling a few clips(maybe a few screws also? Can't remember).. Put Anderson difuser in. Push the part very tight against the bumper cover, then bend these tabs that are built into the diffuser and work just as good as the removed clips. Put bumper back on.

Rob13567 · 05-22-2017, 02:17 PM

Quote:

Originally Posted by CyberGuyPR

I just finished my install. Pull bumper cover off the car, Lethalcamaro's video comes handy for this. Pull out the taillights. Transfer the reflectors to the new diffuser piece. Remove stock diffuser from bumper by pulling a few clips(maybe a few screws also? Can't remember).. Put Anderson difuser in. Push the part very tight against the bumper cover, then bend these tabs that are built into the diffuser and work just as good as the removed clips. Put bumper back on.

Another guy that installed the diffuser said it doesn't line up right up close, small gap unless you sand down some clips?

CyberGuyPR · 05-22-2017, 02:18 PM

I saw none of that. Zero gaps. The fit was impressive. Will post some pics after I get and install the CF lip.

Rob13567 · 05-23-2017, 07:38 AM

Quote:

Originally Posted by CyberGuyPR

I saw none of that. Zero gaps. The fit was impressive. Will post some pics after I get and install the CF lip.

Awesome, one last question if you don't mind is it possible to put stock diffuser back on if you are doing a part out?

CyberGuyPR · 05-23-2017, 08:30 AM

I don't see why not. You may need so me new clips though. Some of the ones I pulled got bent a little. I am sure they are a 50 cent part.

burnningice · 05-24-2017, 12:49 AM

love the splitter. Simply beautiful. Carbon fiber that low scares me.

Dustya · 05-24-2017, 07:00 AM

Quote:

Originally Posted by SSeiSS

That's when you know your camaro is ugly.. when the tent steals the show hahaha.. anyway that's a shelter logic that I got from Lowes ~$400

HAHA nah your car is gorgeous I just need something like that! All the car tents I find are garbage.

burnningice · 06-01-2017, 08:24 AM

Love the splitter. Which one is that?

SSeiSS · 06-02-2017, 12:36 AM

Quote:

Originally Posted by burnningice

Love the splitter. Which one is that?

Thats an anderson composites as well, the only one they offer for the 6th gen so far

SSeiSS · 06-02-2017, 12:37 AM

Quote:

Originally Posted by Dustya

HAHA nah your car is gorgeous I just need something like that! All the car tents I find are garbage.

Haha thanks, yeah I had a cheap one I got from ebay and it didn't survive 2 nights lol. This one still looks solid.

SSeiSS · 08-22-2017, 12:42 AM

Hood Installed. Still needs heat shield.

68dreams · 08-24-2017, 09:26 PM

looks great

Dustya · 08-25-2017, 05:13 PM

Quote:

Originally Posted by Overkill Auto Garage

That looks awesome man. We have the same Hood ordered for our car. We just started our own business carrying a lot of parts for modern muscle. I started listing almost every part I can find for the new Camaro. I have Anderson composites and ACS composites in my inventory now. I don't mean to thread Jack but if anybody is looking for any Camaro parts hit me up. PM me what you're looking for and I'll get you the best price. Or visit the website www.overkillautogarage.com.
I've been in the forums for years but recently changed names. Old name was burnningice

Yeah I definitely dig the hood as well it CF hood is my next purchase just waiting for the right price.

Cupahaters · 08-28-2017, 09:02 PM

Do you have the hood in stock? If so I will buy one now.

08-22-2017, 12:42 AM	#53
SSeiSS Drives: 2017 Chevrolet Camaro 2SS 6MT Join Date: Feb 2017 Location: San Jose, CA Posts: 144	Hood Installed. Still needs heat shield. Attached Images

05-22-2017, 07:13 AM	#43
CyberGuyPR Drives: '16 vert 2LT RS NPP Join Date: Jun 2012 Location: Northwest Indiana Posts: 344	I just finished my install. Pull bumper cover off the car, Lethalcamaro's video comes handy for this. Pull out the taillights. Transfer the reflectors to the new diffuser piece. Remove stock diffuser from bumper by pulling a few clips(maybe a few screws also? Can't remember).. Put Anderson difuser in. Push the part very tight against the bumper cover, then bend these tabs that are built into the diffuser and work just as good as the removed clips. Put bumper back on.

05-22-2017, 02:18 PM	#45
CyberGuyPR Drives: '16 vert 2LT RS NPP Join Date: Jun 2012 Location: Northwest Indiana Posts: 344	I saw none of that. Zero gaps. The fit was impressive. Will post some pics after I get and install the CF lip.

05-23-2017, 08:30 AM	#47
CyberGuyPR Drives: '16 vert 2LT RS NPP Join Date: Jun 2012 Location: Northwest Indiana Posts: 344	I don't see why not. You may need so me new clips though. Some of the ones I pulled got bent a little. I am sure they are a 50 cent part.

05-24-2017, 12:49 AM	#48
burnningice Drives: 2016 SS Mosaic Black Join Date: Jul 2012 Location: Murfreesboro, TN Posts: 438	love the splitter. Simply beautiful. Carbon fiber that low scares me.

06-01-2017, 08:24 AM	#50
burnningice Drives: 2016 SS Mosaic Black Join Date: Jul 2012 Location: Murfreesboro, TN Posts: 438	Love the splitter. Which one is that?

08-24-2017, 09:26 PM	#54
68dreams Drives: 2016 2SS Black M6 Join Date: Sep 2012 Location: Johnson City Tennessee Posts: 201	looks great

08-28-2017, 09:02 PM	#56
Cupahaters Drives: 2017 fifty camaro Join Date: May 2017 Location: Frisco Posts: 247	Do you have the hood in stock? If so I will buy one now.

User Name		Remember Me?
Password