11-24-2018, 06:39 AM | #1 |
Drives: 2014 C7 Join Date: Oct 2013
Location: Houston
Posts: 115
|
Vararam Sneak Peak at new Air Intake
|
11-24-2018, 10:45 AM | #2 |
Drives: 2016 2SS, Red Hot, NPP, Nav, M6 Join Date: Jul 2016
Location: Eagle Creek OR
Posts: 783
|
Teaser!
What are the benefits vs. the competition already out there? |
11-24-2018, 11:59 AM | #3 |
Drives: 2014 C7 Join Date: Oct 2013
Location: Houston
Posts: 115
|
Primary difference is the system delivers the flow required to support a true gain in power vs tricking the ECM to alter the tune wile gaining little to zero increase in actual airflow.
We gain over 1/2-3/4 of a pound of manifold pressure wile others tapper off down to 13.8-13.9 PSI @ 4,900RPM -6,000 RPM ! on a stock LT-1 ,that's well over 20 Rear wheel HP ! The ZL-1's are simply in another world ! Comparisons to others on those have seen over 1.5lbs of pressure added "over and above" some of the competition. We have tested on stock and modified ZL-1's and the VR is a "MUST HAVE" for any ZL-1 ,especially if it's been modified. Construction materials - the materials have far better thermal-dynamic properties than Metal intakes with coatings and even the carbon Fiber intakes . Showing real world temps that are lower by 20-30 deg F inside the manifolds plenum or inside the supercharger ! Quality - Using both Injection and Rotational molding yields a precise fit and internal aerodynamic package that rivals OEM . There are a host of design features that will be shown in the coming week . Stay tuned to our facebook page and the forums for latest updates. VR tech |
11-24-2018, 04:01 PM | #4 | |
Banned
Drives: 2017 Super Sport Cam. Join Date: Feb 2018
Location: US
Posts: 893
|
Quote:
Lemee see if I can explain in english...looks like a smaller air box...yet it will use the same air inlet hole the stock box uses. As a physics specialist specializing in H20...that means air, I'd say the smaller box would cause a more forceful and denser flow of air giving almost a suction effect into the intake...thus increasing HP and performance.....right? |
|
11-24-2018, 04:02 PM | #5 |
Drives: 2018 Camaro SS 1LE Join Date: Oct 2018
Location: Treasure Coast, FL
Posts: 384
|
I dont want the sound tube. If this thing cost more than 300 for just the airbox doubt many will buy.
|
11-24-2018, 04:25 PM | #6 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Interested in what you guys come out with for ZL1's.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
11-25-2018, 12:41 AM | #7 |
Drives: ZL1 1LE Join Date: Oct 2018
Location: NYC (almost)
Posts: 339
|
Afraid I already know the answer but have to ask since it seems to be a closed box as opposed to the WeaponX and Rotofab...Will this be CARB approved???
|
11-25-2018, 01:10 AM | #8 |
Opus13
Drives: 2017 Camaro 1SS, Black Join Date: Jul 2017
Location: Elk Grove, CA
Posts: 125
|
+1 on sound tube delete and hopefully CARB legal.
__________________
"My entire life in one sentence:
It didn't go as hoped, but that's okay" Opus ie. Berkeley Breathed. |
11-25-2018, 11:38 PM | #9 |
Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009
Location: Jefferson City, Missouri
Posts: 13,943
|
Had to chime in...
I had a Vararam on my 5th gen and loved it. It came out late also, but was worth it. I switched from an AirRaid to the Vararam and the difference in sound and power was noticeable. I'm a fan.
__________________
2016 Camaro 1SS - 8-speed - NPP - Black bowties
2010 Camaro 1LT V6 (Sold. I will miss her!) |
11-26-2018, 02:17 PM | #10 |
Drives: 2014 C7 Join Date: Oct 2013
Location: Houston
Posts: 115
|
They are going to Love the Power , The real world performance and the quality. Not to mention super fast install time ! 5-8 Min max! VR tech |
11-26-2018, 03:42 PM | #11 |
Drives: 2018 SS 1LE Join Date: Jun 2018
Location: Atlanta
Posts: 229
|
You should change your banner to LT1 and LT4
|
11-26-2018, 03:59 PM | #12 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Where are the pictures of the installed kit
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-26-2018, 04:08 PM | #13 |
Lethal Camaro
Drives: 16 2SS, 71 Std, Suburban RTS Join Date: Jun 2013
Location: Temecula, CA
Posts: 3,855
|
Following!
__________________
|
11-29-2018, 10:13 PM | #14 |
Drives: 2017 SS 6sp Join Date: Jun 2014
Location: Carrollton texas
Posts: 323
|
all so following
|
|
|
Post Reply
|
|
|