Hi Ram question.

17camaroSS · 03-28-2020, 09:45 PM

So, I’ve got the Hi Ram put on last weekend. As of now the car has factory manifolds with cat deletes, hooker x pipe, smoothed the factory airbox and dimpled it, green filter, Hi Ram, 95mm throttle body flex fuel sensor. I know, I did things a little different, but I did it that way to be different. Now my question is, what are others seeing for gains out of the Hi-Ram? The car is going on the dyno next Sunday for a tune. I’m just curious to see/hear what people are gaining. Thanks!

oldman · 03-29-2020, 09:36 AM

need pics of engine! I have not see a dyno of a hiram on stock cam and /or heads. Looks bad action though.

17camaroSS · 03-29-2020, 02:43 PM

Quote:

Originally Posted by oldman

need pics of engine! I have not see a dyno of a hiram on stock cam and /or heads. Looks bad action though.

Thanks man, I just wanted to do what most don’t just to see what the results were. After I see what it runs I’ll be putting the cam in, stock ported heads, and 2” longtubes. Here’s a picture of the bay. Its not the best picture though lol.

Paintslinger16 · 03-29-2020, 02:53 PM

I was wondering what it would look like!

17camaroSS · 03-29-2020, 03:52 PM

Quote:

Originally Posted by Paintslinger16

I was wondering what it would look like!

Yea haha. I deleted the sound tube and plugged the hole in the elbow. Turned out pretty good. Didn’t know for sure if I was going to be able to use the factory tube until I went and put it on haha.

Paintslinger16 · 03-29-2020, 03:58 PM

What’s the plan for the hood as is or small scoop?

17camaroSS · 03-29-2020, 07:30 PM

Quote:

Originally Posted by Paintslinger16

What’s the plan for the hood as is or small scoop?

I’m going to keep it as is for now. May pick up a VFN hood for it later.

oldman · 03-29-2020, 08:01 PM

Reminds me of the tunnel ram days. The Vette I saw at the last Austin get together just had his hood cut with the highram sticking out... was cool

oldman · 03-29-2020, 08:26 PM

just saying..

https://www.dragzine.com/news/brando...camaro-record/

small birds should be afraid...

17camaroSS · 03-29-2020, 09:00 PM

Lmao. Yea, I like the look a lot the way it sits.

oldman · 03-30-2020, 12:31 AM

I'd cut my hood then air brush a gooblied eyed monster with long nose (intake tube) ripping out of my hood...

Bohanan23 · 03-30-2020, 10:30 AM

Man I'm ready to see how it does! My 2" headers are showing up today. Might jump on a high ram for nest upgrade

17camaroSS · 03-30-2020, 07:41 PM

Quote:

Originally Posted by Bohanan23

Man I'm ready to see how it does! My 2" headers are showing up today. Might jump on a high ram for nest upgrade

I’ll find out on Sunday!!

17camaroSS · 03-30-2020, 07:42 PM

Quote:

Originally Posted by oldman

I'd cut my hood then air brush a gooblied eyed monster with long nose (intake tube) ripping out of my hood...

That’s different!

03-28-2020, 09:45 PM	#1
17camaroSS Drives: Chevy Camaro SS Join Date: Nov 2019 Location: Indiana Posts: 225	Hi Ram question. So, I’ve got the Hi Ram put on last weekend. As of now the car has factory manifolds with cat deletes, hooker x pipe, smoothed the factory airbox and dimpled it, green filter, Hi Ram, 95mm throttle body flex fuel sensor. I know, I did things a little different, but I did it that way to be different. Now my question is, what are others seeing for gains out of the Hi-Ram? The car is going on the dyno next Sunday for a tune. I’m just curious to see/hear what people are gaining. Thanks! Attached Images

03-29-2020, 09:36 AM	#2
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	need pics of engine! I have not see a dyno of a hiram on stock cam and /or heads. Looks bad action though. __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

03-29-2020, 08:01 PM	#8
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	Reminds me of the tunnel ram days. The Vette I saw at the last Austin get together just had his hood cut with the highram sticking out... was cool __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

03-30-2020, 12:31 AM	#11
oldman Drives: SS 6 speed of course Join Date: Jan 2016 Location: Hilo, HI Posts: 4,316	I'd cut my hood then air brush a gooblied eyed monster with long nose (intake tube) ripping out of my hood... __________________ Forged short block, large duration sub .600 lift Cam Motion cam, 7200 RPM fuel cut, Pray Ported Heads, 3.85 pulley D1X, stage II intercooler, DSX secondary low side, DSX E85 sensor, Lingenfelter big bore 2.0 pump, ported front cats, 60608 Borla, LT4 injectors, ZL1 1LE driveshaft and Katech ported TB, ported MSD intake, BTR valvetrain, ARP studs, ProFlow valves, PS4 tires.

03-29-2020, 02:53 PM	#4
Paintslinger16 Two Lane Blacktop Drives: '18 Camaro 2SS Join Date: Jul 2019 Location: Black River, NNY Posts: 516	I was wondering what it would look like!

03-29-2020, 03:58 PM	#6
Paintslinger16 Two Lane Blacktop Drives: '18 Camaro 2SS Join Date: Jul 2019 Location: Black River, NNY Posts: 516	What’s the plan for the hood as is or small scoop?

03-29-2020, 09:00 PM	#10
17camaroSS Drives: Chevy Camaro SS Join Date: Nov 2019 Location: Indiana Posts: 225	Lmao. Yea, I like the look a lot the way it sits.

03-30-2020, 10:30 AM	#12
Bohanan23 Drives: 2016 Camaro 2SS A8 Join Date: Dec 2019 Location: Moore, OK Posts: 113 View My Garage	Man I'm ready to see how it does! My 2" headers are showing up today. Might jump on a high ram for nest upgrade

User Name		Remember Me?
Password