[Sykotk]

Good to know that the Morimotos fit a 2024. I sold my mosaic black ghosted and could kick myself. Is anyone doing the ghosted ones anymore? RPI is a nope and it looks like Phastek isn't offering them anymore either. I'd love to get paint matching ones.

[havelegs]

Originally Posted by Sykotk

Good to know that the Morimotos fit a 2024. I sold my mosaic black ghosted and could kick myself. Is anyone doing the ghosted ones anymore? RPI is a nope and it looks like Phastek isn't offering them anymore either. I'd love to get paint matching ones.

There shouldn't be any change from the 16 MY to the 24.

[bandier]

Cool. So I dont have to remove the tires or jack up the car? I didn't get to install last weekend as the superbowl got in the way. Thanks for the install tips!

Originally Posted by E75

Yeah. The little wires have to get coiled up in the housing. But you have to twist the bulb holder in… so it helps to twist the wire the “wrong” way first before you tighten the bulb socket.

Also the rears use a small torx bit on a 1/4 ratchet. No jacking needed to get the fender liner screw out.

On the front there is a little black air duct, you can poke your finger in and release the side marker without any removal of the liner.

[Summit20171SS]

Im thinking about getting a set myself, just torn between the morimotos and the diode dynamics

[havelegs]

Originally Posted by bandier

Cool. So I dont have to remove the tires or jack up the car? I didn't get to install last weekend as the superbowl got in the way. Thanks for the install tips!

You can turn the front wheels to each side to gain more room. For the rears you can jack up each side to get some room for torx bit/socket, depending on your tools.