Ordered body colored splash guards

FarmerFran · 04-04-2020, 09:05 AM

I got the front and rear the genuine Chevy accessories. They should be here early next week. I will post up before and after pictures.

I just did not like the look of the flat black ones.

2SS Capt · 04-04-2020, 11:04 AM

Quote:

Originally Posted by FarmerFran

I got the front and rear the genuine Chevy accessories. They should be here early next week. I will post up before and after pictures.

I just did not like the look of the flat black ones.

I have those The GM Body color ones on my Shadow Gray Metallic 2020 2SS, love them! They look great...

supersportss · 04-04-2020, 01:06 PM

They do look good.

FarmerFran · 04-07-2020, 09:06 PM

Put them on today. Including taking out all the tools, reading the instructions 2x, install, clean up was about 2 hours. I would day 2 out of 5 for hardness. It took longer to remove and reinstall the wheels than installing the guards. Fitment is great. Note to anyone buying these, you need a rivet tool for the fronts.

arpad_m · 04-07-2020, 09:26 PM

Looks spiffy and the install job is nice, too

I had these GM splash guards on my previous Camaro, but then I wanted moar powa', then wider wheels/tires, and these really only provide enough protection with stock width tires.

2SS Capt · 04-07-2020, 09:29 PM

Quote:

Originally Posted by FarmerFran

Put them on today. Including taking out all the tools, reading the instructions 2x, install, clean up was about 2 hours. I would day 2 out of 5 for hardness. It took longer to remove and reinstall the wheels than installing the guards. Fitment is great. Note to anyone buying these, you need a rivet tool for the fronts.

Look great!!!

FarmerFran · 04-09-2020, 04:00 PM

FYI: If I had to do it again I could do it in an hour or a tad over.

bjbonentte · 04-14-2020, 07:57 AM

SSG 1le

articblueSS · 04-17-2020, 11:16 PM

I installed mine last weekend, without taking the wheels off. It took about an hour. The fronts were easy. The rear were a real pain. If I was going to do it again, I’d probably take the rear wheels off.

Dragon08 · 04-17-2020, 11:34 PM

Quote:

Originally Posted by articblueSS

I installed mine last weekend, without taking the wheels off. It took about an hour. The fronts were easy. The rear were a real pain. If I was going to do it again, I’d probably take the rear wheels off.

What color did you get for your ABM? Did you get the painted black? or Flat Black.

Curious because I have the Crush, and they dont seem to be available in my color, and I know the ABM is a rare color.

articblueSS · 04-18-2020, 06:40 AM

Quote:

Originally Posted by Dragon08

What color did you get for your ABM? Did you get the painted black? or Flat Black.

Curious because I have the Crush, and they dont seem to be available in my color, and I know the ABM is a rare color.

I got arctic blue to match the car. I was very surprised to see it was available.

SliChillax · 04-18-2020, 12:21 PM

These look great but will they work on a ZL1? The rear diffuser of the ZL1 continues along the side of the bumper and the sideskirts also stick out a bit more in the front. Do they sell compatible guards for ZL1?

arpad_m · 04-18-2020, 12:27 PM

Quote:

Originally Posted by SliChillax

These look great but will they work on a ZL1? The rear diffuser of the ZL1 continues along the side of the bumper and the sideskirts also stick out a bit more in the front. Do they sell compatible guards for ZL1?

No, as far as I know, the GM body color splash guards are not compatible with the ZL1, you'll need to go aftermarket (RPI Designs, ZL1 Addons, ACS Composite etc.)

articblueSS · 04-19-2020, 02:36 PM

Quote:

Originally Posted by articblueSS

I got arctic blue to match the car. I was very surprised to see it was available.

This is what they look like

04-04-2020, 09:05 AM	#1
FarmerFran Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020 Location: Earth Posts: 4,032	Ordered body colored splash guards I got the front and rear the genuine Chevy accessories. They should be here early next week. I will post up before and after pictures. I just did not like the look of the flat black ones.

04-07-2020, 09:06 PM	#4
FarmerFran Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020 Location: Earth Posts: 4,032	Put them on today. Including taking out all the tools, reading the instructions 2x, install, clean up was about 2 hours. I would day 2 out of 5 for hardness. It took longer to remove and reinstall the wheels than installing the guards. Fitment is great. Note to anyone buying these, you need a rivet tool for the fronts. Attached Images

04-07-2020, 09:26 PM	#5
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,605 View My Garage	Looks spiffy and the install job is nice, too I had these GM splash guards on my previous Camaro, but then I wanted moar powa', then wider wheels/tires, and these really only provide enough protection with stock width tires. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

04-14-2020, 07:57 AM	#8
bjbonentte Drives: 2019 Chevrolet Camaro Join Date: Mar 2020 Location: Lantana, TX Posts: 77	SSG 1le Attached Images

04-17-2020, 11:16 PM	#9
articblueSS Drives: 2018 ABM 1SS 6M Join Date: Jan 2020 Location: NJ Posts: 30	I installed mine last weekend, without taking the wheels off. It took about an hour. The fronts were easy. The rear were a real pain. If I was going to do it again, I’d probably take the rear wheels off. __________________ 2018 1SS 6M ABM

04-04-2020, 01:06 PM	#3
supersportss Drives: 2019 SS Join Date: Apr 2020 Location: North Texas Posts: 259	They do look good.

04-09-2020, 04:00 PM	#7
FarmerFran Drives: 2023 ZL1 Vert M6 "Sharky" Join Date: Mar 2020 Location: Earth Posts: 4,032	FYI: If I had to do it again I could do it in an hour or a tad over.

04-18-2020, 12:21 PM	#12
SliChillax Drives: Camaro ZL1 A10, F-Type R, RR Sport Join Date: Jul 2016 Location: Albania Posts: 216	These look great but will they work on a ZL1? The rear diffuser of the ZL1 continues along the side of the bumper and the sideskirts also stick out a bit more in the front. Do they sell compatible guards for ZL1?

User Name		Remember Me?
Password