04-04-2020, 03:57 PM | #1 |
Join Date: Mar 2020
Posts: 25
|
Let me see your FORGED wheels
In the market for a nice set of forged wheels for the 1LE. I want to see everyone’s set up running forged wheels. Post pics wheels specs ride quality etc.
__________________
INSTAGRAM: @SUPAA_ANT
|
04-04-2020, 05:04 PM | #2 |
Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018
Location: Petersham MA
Posts: 4,749
|
__________________
2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion 1059 WHP/944 WTQ, 9.48@150
|
04-05-2020, 03:21 PM | #3 |
Drives: 2017 Camaro 2SS A8 Join Date: May 2019
Location: USA
Posts: 1,656
|
Full forged or is rotary forged good too?
__________________
Roto-Fab w/sound tube delete, Katech ported TB, Pray IM, Velossa, DD side markers, DSX FF, UPR Catch can, Halo brace, My custom vent gauge pod
Originally Posted by arpad_m - “Aww, yet another oil thread with almost the same question in the OP“ |
04-06-2020, 07:11 AM | #4 |
Join Date: Mar 2020
Posts: 25
|
Damn I guess no one. Let me see your cheap wheels post them
__________________
INSTAGRAM: @SUPAA_ANT
|
04-06-2020, 11:13 PM | #5 |
Rohana rfx11
10" Front 11"Rear 285/305 nt555g2.
Offset 45mm/25mm
__________________
DMS Flex Fuel-E85
HPTuners Ngauge Roto Fab CAI, LPE Ported/Polished 95mm LT5Throttle Body, PRAY Ported MSD Intake Manifold, SP Coated TSP 1 7/8" Catlless Longtubes Hooker BlackHeart Cat-Back, Mishimoto Catch Can (Which always has some nasty in it) Instagram@Weapon_6 |
|
04-07-2020, 03:40 PM | #6 |
Drives: 2018 Hyper Blue 2SS 1LE Join Date: Aug 2018
Location: Dessert
Posts: 486
|
This set up is in stock 1LE specs. The total weight is over 30lbs lighter than a stock set. There is a noticeable difference in the feeling when driving. Take off from a stop is easier and transitions feel more crisp. There is more NVH from these wheels and it has a lot to do with the fact that there is a lot less mass in the wheels to damp said NVH. It is essentially 7.5lbs a wheel less than factory.
__________________
2018 Hyper Blue Metallic 2SS 1LE with Nav, PDR, and track alignment
1:34.20 Willow Springs Big Track |
04-07-2020, 06:19 PM | #7 | |
Drives: 2017 ZL1 Join Date: Jan 2017
Location: NJ
Posts: 905
|
Quote:
__________________
2017 Camaro ZL1 Coupe M6 (847whp Dynojet on 93)
|
|
04-07-2020, 07:26 PM | #8 |
Drives: 1SS/1LE Join Date: May 2009
Location: Texas
Posts: 388
|
The wheels on the blue SS/1LE are Project6GR Ten https://project6gr.com/ Seems to be a popular company in the Mustang community. From the looks of it they don't have Camaro rotary forged wheels listed, but they do have proper bolt pattern in their fully forged wheels. The prices get a bit higher in that category though. It's a good looking setup.
__________________
|
04-07-2020, 08:49 PM | #9 |
Drives: 2018 Hyper Blue 2SS 1LE Join Date: Aug 2018
Location: Dessert
Posts: 486
|
Yes, Project 6 GR Ten wheels. These are the Fully Forged ones. They can do the Spun Forged in our size and bolt pattern. But you are limited on offsets. If you wanted an 11" front wheel they can only go to a +15mm offset instead of the +11mm that the ZL1 1LE has. I'd like to do a set in 19" but can't afford that right now.
__________________
2018 Hyper Blue Metallic 2SS 1LE with Nav, PDR, and track alignment
1:34.20 Willow Springs Big Track Last edited by Scargoes; 04-12-2020 at 09:31 PM. |
04-12-2020, 05:25 AM | #10 |
Drives: Chevrolet Camaro ZL1 Join Date: Nov 2019
Location: Toledo, OH
Posts: 194
|
Here are my HRE FF11's in IPA(Satin Bronze).
|
04-12-2020, 02:22 PM | #11 |
Drives: 2018 1SS 1LE Join Date: Dec 2012
Location: NY
Posts: 395
|
|
04-16-2020, 08:27 AM | #12 |
Drives: 18 ZL1 1LE Join Date: Apr 2013
Location: Florida
Posts: 703
|
Signature SV501
|
04-16-2020, 05:28 PM | #13 |
IG: @velveteen_camaro
Drives: 2016 Camaro 2SS Convertible Join Date: Dec 2016
Location: Stallings, NC
Posts: 69
|
__________________
|
|
|
Post Reply
|
|
|