[blackbee]

Just Purchased Corsa xpipe (14788), only want a little bit more sound from NPP, I know I have to cut npp. so will the xpipe fit to the stock suitcase?
Is anyone going this setup would like to share?

[GooseSS]

From what I've read this will fit no problem.

[blackbee]

Originally Posted by GooseSS

From what I've read this will fit no problem.

Thats nice to hear!

[GooseSS]

Wait, your the dude with the a8 with that ticking problem right? I may be wrong, but i thought autos need afm valves on the mid pipes. Not sure what deleting it, might throw a code or sound like crap in v4 mode. Will let someone who knows the autos better chime in.

[blackbee]

Originally Posted by GooseSS

Wait, your the dude with the a8 with that ticking problem right? I may be wrong, but i thought autos need afm valves on the mid pipes. Not sure what deleting it, might throw a code or sound like crap in v4 mode. Will let someone who knows the autos better chime in.

Yes, its me. ill just live with it, once I have time, ill bring it to the dealer.
I read lots of AFM valves. probable will plug it and zip tie somewhere under the car

[appleman22]

does this corsa x pipe remove the secondary cats?

[GooseSS]

It does, appleman.

[68Vette]

Blackbee: If you wouldn't mind posting up a sound clip once you have installed the X Pipe because I'm seriously looking at the same set up. Let us know if there is any drone too.

[blackbee]

Originally Posted by 68Vette

Blackbee: If you wouldn't mind posting up a sound clip once you have installed the X Pipe because I'm seriously looking at the same set up. Let us know if there is any drone too.

Sure. I will record and post. But I live in ca. Can’t ship directly. Got wait for a while

[KingLT1]

It does not look like it's going to bolt right up. It's designed to fit the Corsa Axle back. Look at the side towards rear of the car and you will notice the reduced diameter ends. That is so it will slip right inside the Corsa axle back and clamp it with a band clamp. With the stock NPP muffler the ends will but, so it will need to be welded.

[blackbee]

Originally Posted by KingLT1

It does not look like it's going to bolt right up. It's designed to fit the Corsa Axle-back. Look at the side towards the rear of the car and you will notice the reduced diameter ends. That is so it will slip right inside the Corsa axle-back and clamp it with a band clamp. With the stock NPP muffler, the ends will but, so it will need to be welded.

maybe can slip right into stock npp pipes?

[KingLT1]

Originally Posted by blackbee

maybe can slip right into stock npp pipes?

I'll try once more...The X pipe is reduced on the ends which makes it the same diameter as the stock NPP pipes so the Corsa axle back will slip on to the X pipe.

So no The X pipe will not slip onto the NPP pipes. You will likely need the hooker black heart crush pipe deletes to use as adapters or take it an exhaust shop and have it welded.

[RobbyBeefcake87]

Originally Posted by KingLT1

I'll try once more...The X pipe is reduced on the ends which makes it the same diameter as the stock NPP pipes so the Corsa axle back will slip on to the X pipe.

So no The X pipe will not slip onto the NPP pipes. You will likely need the hooker black heart crush pipe deletes to use as adapters or take it an exhaust shop and have it welded.

The xpipes have a downloadable pdf on the corsa website for installation instructions. It is made to fit their axle back but can also fit the stock npp with provided clamps. The pdf has specific instructions for connecting the npp if one only gets the xpipe and not the whole catback system.

[KingLT1]

Ok so it comes with the sleeve adapters if using the stock NPP muffler. Good deal!