03-15-2020, 09:40 AM | #1 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
Go fast goodies for sale, cnc ported heads, cam, etc
Heads were cnc ported by Wegner Automotive, BTR .660 springs, steel retainers. Have about 5000 miles on the port job, springs and seals. SOLD!!!
Texas speed stage 4 cam. Has about 8500 miles on cam. It is a 3 bolt configuration. Comp cams push rods SOLD!!! Rockers with CHE trunion bushings. Roll nice and smooth, good as new. SOLD!! Camshaft $200 to your door
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. Last edited by Clarkstar; 03-16-2020 at 10:21 AM. |
03-15-2020, 09:53 AM | #2 |
Drives: Chevrolet Camaro Join Date: Jul 2019
Location: SW IL
Posts: 13
|
I’ll take the rockers. PM sent.
|
03-15-2020, 10:06 AM | #3 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
03-15-2020, 02:41 PM | #4 |
Drives: 2014 Camaro SS 1LE Join Date: Jul 2019
Location: Jacksonville, NC.
Posts: 161
|
What are the specs on the heads?
|
03-15-2020, 02:58 PM | #5 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
Stock valves, not milled. 70cc
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
03-16-2020, 12:08 AM | #6 |
Drives: 2012 Camaro 1LS Join Date: Feb 2017
Location: Nashville, TN
Posts: 78
|
PM sent for heads
__________________
2012 Black 1LS M6: Cold Air Inductions Intake w/ Scoop, McNally Dual Valve Catch Can, 2.5 Inch Exhaust, Magnaflow Resonated X-Pipe, Muffler/Resonator Delete, SS Tips, 2017 ZL1 Style Rims, 255/45r20 Front, 275/40r20 Rear, SS Bumper Conversion w/ Fog Lights and LED "Knight Rider" Scanner.
|
03-16-2020, 05:47 AM | #7 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
03-16-2020, 05:57 PM | #8 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
The cam is still for sale. TSP stage 4. $200 shipped.
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
03-26-2020, 10:06 AM | #9 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
Cam still for sale!!!
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
03-28-2020, 04:50 PM | #10 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
$175 to your door on the camshaft!!!
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
03-28-2020, 05:56 PM | #11 |
Drives: 2012 Chevy ss Camaro Join Date: Jul 2019
Location: Washington
Posts: 38
|
what are specs on cam?
|
03-28-2020, 07:00 PM | #12 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
See image...
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
04-04-2020, 06:52 AM | #13 |
Drives: 2013 1SS 1LE Join Date: Jun 2016
Location: Ixonia wi
Posts: 1,456
|
Bump!
__________________
2013 1le- Katech 416 short block, TSP custom grind cam, LOD intake, cnc heads by F.ED., Nick William's 102mm T.B., CORN fed, Pedders coilovers. Performance street alingnment by Justin at Lake Country Alignment and dyno tune by Late Model Throttle.
603 h.p. 495 ft lbs tq. |
|
|
|
|