02-24-2019, 05:16 PM | #1 |
Drives: 2018 Redline Edition 2SS Join Date: Dec 2014
Location: Mays Landing, NJ
Posts: 778
|
Trying to figure out what gauge(s) to run
So I picked up an ECS Novi 1500 kit, waiting to install it in the next 2 weeks then up to ECS for them to tune it. I'm not sure if they're going install a 3 bar MAP sensor so I'm holding off on picking up a boost gauge until then(I assume if they wire in a 3 bar I can get boost readings from the OBD2 port correct?).
If I decide to go analog boost gauge what do you guys recommend that will properly fit in the pod? I'll most likely go with the single pod that clips onto the vent on the dash, was it hard running all of the wiring through? If I decide to go with a second gauge what would you guys do? If the tune is dead on do I really need to run a wide band? I did a search and found some older threads, looking for some recent ideas. Thanks guys!
__________________
2018 Redline Edition 2SS- A8, NPP, MRC, Recaro seats, ECS Novi 1500 tuned by EFX, cat deletes, Mighty Mouse Wild CC, GM STB, smoked ZL1 3rd brake light, Xpel XR Black 35% tint all around, Street Scene front splitter, C7 Carbon ZL1 side skirts Drake Muscle Car wicker bill, Adams Polishes Ceramic Coating
2010 Infiniti G37x Sedan for the DD. Last edited by FrostySS; 02-24-2019 at 05:39 PM. |
02-24-2019, 05:24 PM | #2 |
Drives: 17 SS a8 Join Date: Feb 2010
Location: omaha
Posts: 1,678
|
wideband
__________________
dropped a valve in the 6.2. now running a drop in rods and piston 5.3
best et 5.83@121 with the 5.3 http://www.camaro6.com/forums/showthread.php?t=465472 |
02-24-2019, 07:58 PM | #3 |
Drives: 2016 1SS NFG A8 Join Date: Aug 2017
Location: 46804
Posts: 6,799
|
Aem 30-0334 with vent pod and torque pro app on your phone with a pro clip holder.
__________________
2016 NFG 1SS A8
Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA |
02-24-2019, 08:53 PM | #4 |
Drives: 2016 Camaro 2SS Join Date: Apr 2017
Location: Stansbury Park, Utah
Posts: 1,092
|
AEM 30-0334 wideband. it come with a passthru OBD2 connection.
dual pod choices are: https://zzperformance.com/collection...uge-pillar-pod or https://www.phastekperformance.com/D...ro-campod4.htm or you can run the single pod and then one of those gauges that mounts in the vent like the NGauge or P3 gauge.
__________________
2016 2SS, MRC, NPP, A8. Procharger P-1X,Stage II,std bypass, 3.9, Alky Meth - 10.84 @129 - DA+2000
New Mods - GPI drop ins, Kooks 2", LT4 fueling, Cam, Circle D Converter, 3.5 pulley & dual nozzle meth. |
02-26-2019, 08:23 PM | #5 |
Drives: 2018 ZL1 Join Date: Oct 2011
Location: Huntingtown, MD
Posts: 1,138
|
I run an Aeroforce and an AEM wideband.
__________________
2018 ZL1…Many mods to come
|
|
|
Post Reply
|
|
|