12-24-2012, 04:56 AM | #1 |
OMINOUS
Drives: '10 Camaro 2SS/RS M6 Join Date: Dec 2012
Location: Lincoln, Nebraska
Posts: 223
|
Need New Wheels HELP!!!!
Hey guys,
I'm looking for a set of 19x10.5 all the way around. Anyone know of manufacturers who produce these rims that aren't as expensive as Forgeline with the correct backspacing? BTW what is the offset? I've been reading +27mm is optimum. Is that the same for the front and back? I'd definitely go with Forgeline's but I don't want to spend that much money. Also, I'd probably be willing to do 20x10.5's all the way around if I can't find 19x10.5's. Any help is appreciated, thanks! |
12-24-2012, 10:44 AM | #2 |
Drives: pleather and Chiclets Join Date: Mar 2012
Location: a line somwhere
Posts: 4,206
|
if you can find the answer I am curious as well. Also the offsets to get square on forgestar cf5 |
12-24-2012, 04:03 PM | #3 |
Drives: 2010 2ss red LS3 Join Date: Aug 2011
Location: perkasie pa
Posts: 533
|
I'm pretty sure
the Pedders/Forgeline 19 X 10.5 wheel offsets are different front to rear.I have been trying to obtain them,but they seem to be TOP SECRET.
Last edited by rockrau; 12-24-2012 at 04:08 PM. Reason: add info. |
12-24-2012, 07:48 PM | #4 |
Drives: pleather and Chiclets Join Date: Mar 2012
Location: a line somwhere
Posts: 4,206
|
|
12-25-2012, 05:45 AM | #5 |
OMINOUS
Drives: '10 Camaro 2SS/RS M6 Join Date: Dec 2012
Location: Lincoln, Nebraska
Posts: 223
|
The problem is, if they do, then they'll lose to the competition. It's a way to secure the market. Maybe someone who has the setup already could share the info. I'm sure it'd take no more than a machinists ruler, front and rear wheels to find out.
|
12-25-2012, 05:48 AM | #6 |
Drives: '13 camaro zl1 '08 daytona charger Join Date: Dec 2012
Location: san diego
Posts: 3,176
|
id go with foose
|
12-26-2012, 11:04 AM | #7 |
OMINOUS
Drives: '10 Camaro 2SS/RS M6 Join Date: Dec 2012
Location: Lincoln, Nebraska
Posts: 223
|
Well, here it is. I looked up some VMR rims. I found their v710's are offered in 19x10 and 19x11 both with a +25mm offset. I just wonder if those will fit? The backspacing on the 19x10's will be approx. 6" which should be fine. The backspacing on the 19x11's will be approx. 6.50" which should also be fine. Now I'm curious to know how far they will stick out being that I have Air Lift. Will this cause problems?
|
|
|
|
|