07-03-2022, 12:15 PM | #1 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
AiM Solo 2 Custom Mount Complete!
After futzing around with the various lap timer apps and not getting the accuracy and consistency I was looking for it was time for the gloves to come off. I felt it silly to spend all this money on track days without the ability to accurately measure MY performance so I have an accurate base for improvement. Enter the AiM Solo 2. It’s basically the cheapest, simplest choice vs. the Garmin Catalysts and so on but that’s fine for me. I’m not needing data acquisition, just lap times. Now I needed a mount! I have a tinted windshield, so suction cups are a no go. I also didn’t want to obstruct more of our already limited field of view. I already have the ProClip phone mount on the console, so after reviewing their dash phone mount I though I might have a winner. Fast forward to today, and everything seemed to have come together nicely. CamaroFest isn’t for another couple of days so I haven’t gotten to test it, but I high hopes it’ll work just fine.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
07-04-2022, 04:27 AM | #2 |
|
I love that idea. I already have the Proclip that I haven't used mainly because I thought it was too close my hands on the wheel. Is there enough clearance in your setup?
As far as cheap and accurate lap timers for your phone, I've been using RaceChrono Pro for years. It's linked to an external GPS which makes laps time very accurate and has many other features. I love its customizable screen showing delta lap times etc. I've compared it to using a transponder which I used for TTs and its easily within 0.1 sec.
__________________
|
07-04-2022, 06:39 AM | #3 | |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Quote:
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
|
07-04-2022, 08:26 PM | #4 |
|
For sure you don't want to look down. My phone is mounted so I don't look down
__________________
|
07-05-2022, 11:10 AM | #5 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,817
|
oh nice looks good i use mine on the left side but ive scratches up my dash a few times lol oh well
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
07-16-2022, 01:21 PM | #6 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Mount is confirmed AWESOME. Used all day a CamaroFest, wouldn't change a thing.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
07-20-2022, 12:29 PM | #7 |
|
How was the clearance to the AIM with your hand on the wheel in that area? Of course this also depends on where you have the wheel set at
__________________
|
07-20-2022, 02:40 PM | #8 | |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Quote:
Note! I Have my wheel telescoped as far back to me as I can get it usually.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
|
07-22-2022, 05:15 AM | #9 |
|
I'm looking at doing this. Have any more details on how you mounted the AIM to the Proclip?
|
07-22-2022, 07:18 AM | #10 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
It’ll be obvious how they fit together when you get them in your hands. Just drill your holes and call it a day, not much to it.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
07-25-2022, 07:13 PM | #11 |
|
I love it and I already had the Proclip laying around. Plan to hardwire the power under the dash. Also will securing with a lanyard. Thanks
__________________
|
07-25-2022, 07:19 PM | #12 |
Drives: 2018 ZL1 Coupe NFG M6 Join Date: May 2017
Location: Nolensville, TN
Posts: 618
|
Excellent! Glad you like it.
__________________
1989 Forumla 350 WS6 <- High School
2000 Trans Am Firehawk <- After High School 2017 Colorado Z71 <- Daily 2018 ZL1 M6 <- Not Daily |
11-16-2023, 09:05 PM | #13 |
|
Pictures of the AIM mount attached to the Proclip mount after drill holes in the proclip and attaching hardware. It becomes obvious when you have the pieces in hand. Do test fits before drilling
__________________
|
11-17-2023, 03:59 PM | #14 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
Has anyone tried a Dragy???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
Post Reply
|
|
|