Complete Street Perfoemance 2018 ZL1 775 HP

Boomers18ZL1 · 08-11-2020, 09:15 PM

Getting the CSP 775 HP package. Full bolt ons, Kong Ported Blower, griptech pulley package, 103mm Nick Williams throttle body, NGX spark plugs, and dyno tune. Has anyone had work done from Complete Street Performance in PA? Looking forward to the build. Cam shaft in the spring.

DrBlockHed · 08-11-2020, 10:35 PM

I also live in NJ and was looking at that package. When you getting it installed? I’ll be following this thread for results, good luck!

20Bluezl1 · 08-12-2020, 01:47 AM

I also live in jersey and thinking of Jannetty in CT to do my work. I heard mixed things about CSP just something about them that I don't like. Is that 750 rwhp?

IneedAZ · 08-12-2020, 05:41 AM

Shame u can't do the cam at same time, sucks paying for labor twice. That is why I bit the bullet and doing all at once.

*radz28* · 08-12-2020, 08:06 AM

On-line purchases with CSP has been a GREAT experience for me. That isn't what you're necessarily talking about, but I think an argument could be drawn between the two.

soceur77 · 08-12-2020, 08:20 AM

I ve only dealt with CSP, actually the car is back there for additional upgrades, but my first phase of FBO, Cam, ported S/C from Kong and interchiller gave me 749WHP with no heat soak what so ever. Im excited to get the car back with low side fuel and 2650 installed. Can't find a single thing wrong with CSP other than they get alot of business therefore they may have your car longer than you expect or want, but when its done, its done right and i have no fears of flooring it and it exploding on me. Give Andrew and Alex a call, Im sure they can win you over with their professionalism and knowledge.

2ltrgsr · 08-12-2020, 08:33 AM

I have a modified version of that package(mods in signature)
They were great to deal with and Alex is the man, he gives a no-nonsense approach to the mods they suggest.
Andrew is extremely busy so don't get turned off if he doesn't answer right away...

I had my car re-tuned here in Va by a good friend of mine who tunes for Va Speed and we got some more power out of it(car had just 15-16 degrees of timing when i got it back from Andrew).

They will be upfront with you on anything you ask.
I highly recommend those guys.

RDBill · 08-12-2020, 10:09 AM

Nothing against CSP, but Race Proven Motorsports is right over the bridge in Delaware and they're awesome! Other than the obvious which is they do great work.... the shop is enormous which means your car stays indoors, out of the weather 100% of the time. And because it's Delaware there is no sales tax. I'm super happy with my car

Evolvedx27 · 08-12-2020, 10:43 AM

Quote:

Originally Posted by RDBill

Nothing against CSP, but Race Proven Motorsports is right over the bridge in Delaware and they're awesome! Other than the obvious which is they do great work.... the shop is enormous which means your car stays indoors, out of the weather 100% of the time. And because it's Delaware there is no sales tax. I'm super happy with my car

This is where my car is going next!

MartinLe · 08-12-2020, 12:04 PM

Quote:

Originally Posted by radz28

On-line purchases with CSP has been a GREAT experience for me. That isn't what you're necessarily talking about, but I think an argument could be drawn between the two.

Hey Radz28, kind of off the thread, but I am thinking of just doing the 2650R, appropriate TB and headers (cat delete), CAI and nothing else on NT05R's. Of course, tuned properly (detuned?) What can I expect HP-wise or ET?

soceur77 · 08-12-2020, 03:19 PM

Quote:

Originally Posted by MartinLe

Hey Radz28, kind of off the thread, but I am thinking of just doing the 2650R, appropriate TB and headers (cat delete), CAI and nothing else on NT05R's. Of course, tuned properly (detuned?) What can I expect HP-wise or ET?

If youre going to do that, Id suggest also doing a cam, if not that will be your limiting factor HP wise (fuel), Id imangine around 690ish whp safe , anda tad more if pushing the limit.

As far as getting more HP outside of tunes done by Andrew at CSP, thats a normal occurance as I believe he tunes with safety in mind first which I dont mind as I dont feel like buying a bottom end right now...lol But I have seen him push cars on the dyno to hit a number then back it down, so hes def not scared to go aggressive..lol

2ltrgsr · 08-12-2020, 07:12 PM

Quote:

Originally Posted by soceur77

If youre going to do that, Id suggest also doing a cam, if not that will be your limiting factor HP wise (fuel), Id imangine around 690ish whp safe , anda tad more if pushing the limit.

As far as getting more HP outside of tunes done by Andrew at CSP, thats a normal occurance as I believe he tunes with safety in mind first which I dont mind as I dont feel like buying a bottom end right now...lol But I have seen him push cars on the dyno to hit a number then back it down, so hes def not scared to go aggressive..lol

I agree... we ended up with 19 degrees of timing which is still conservative by comparison to most cars.

Slickcas · 08-13-2020, 03:33 AM

CSP is a good shop. Have talked to Andrew multiple time at the track. Very smart and just a funny dude.

Markoz28 · 08-13-2020, 06:45 AM

Just bought a bunch of suspension stuff and spark plugs from them last night. Good prices and even better with discount code. I’ve purchased from them before with no complaints. Also I’ve spoken with their sales/tech and they are extremely helpful. They won’t advise you to buy things you don’t need. In fact things that I thought I wanted they steered me away from and towards something else and it was even less expensive. Seems that they want to do things right.

08-11-2020, 09:15 PM	#1
Boomers18ZL1 Drives: 2018 Chevrolet Camaro ZL1 6MT Join Date: Aug 2020 Location: New Jersey Posts: 42	Complete Street Perfoemance 2018 ZL1 775 HP Getting the CSP 775 HP package. Full bolt ons, Kong Ported Blower, griptech pulley package, 103mm Nick Williams throttle body, NGX spark plugs, and dyno tune. Has anyone had work done from Complete Street Performance in PA? Looking forward to the build. Cam shaft in the spring.

08-12-2020, 05:41 AM	#4
IneedAZ Drives: 2017 ZL1 A10 & 2021 BMW M340i x Dr Join Date: Mar 2009 Location: Tampa Posts: 5,110 View My Garage	Shame u can't do the cam at same time, sucks paying for labor twice. That is why I bit the bullet and doing all at once. __________________ Sold 2012 2LT RS 12.3@112 old setup Sold 1967 Camaro Pro Street. Ran 10's mild BB on NOS. 2017 HyperBlue ZL1 A10 Born 3/17/17Delivered 4/08/17 2020 Build: Mag2650, BTR Stage2, NW103, BG, 14% lower, 90mm upper, ARH 2" Long system w/no cats, SW Legend mufflers. 807hp/762tq on 93 gas and 848hp/792tq on e47 Sold 2018 (Go Mango) Dodge Charger Daytona 392 Daily Driver Daily Driver 2021 BMW M340i Xdrive

08-12-2020, 08:06 AM	#5
radz28 Petro-sexual Drives: Ultra-Grin Join Date: Oct 2006 Location: Crazy Coast Posts: 15,201 View My Garage	On-line purchases with CSP has been a GREAT experience for me. That isn't what you're necessarily talking about, but I think an argument could be drawn between the two. __________________ '20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs

08-12-2020, 08:33 AM	#7
2ltrgsr AXLERODZL1 Drives: 2019 Riverside blue ZL1 Camaro Join Date: Dec 2018 Location: Carrollton, VA Posts: 205	I have a modified version of that package(mods in signature) They were great to deal with and Alex is the man, he gives a no-nonsense approach to the mods they suggest. Andrew is extremely busy so don't get turned off if he doesn't answer right away... I had my car re-tuned here in Va by a good friend of mine who tunes for Va Speed and we got some more power out of it(car had just 15-16 degrees of timing when i got it back from Andrew). They will be upfront with you on anything you ask. I highly recommend those guys. __________________ '19 ZL1 A10 Riverside Blue PDR/Nav/Sunroof Kong ported blower/snout Roto-Fab Big gulp 103 TB Lingenfelter Lower Pulley(9.17) 1 7/8 ARH headers and Exhaust Meth injection(single nozzle) 733whp/788tq

08-11-2020, 10:35 PM	#2
DrBlockHed Drives: 18 ZL1 Convertible Join Date: Jun 2019 Location: NJ Posts: 118	I also live in NJ and was looking at that package. When you getting it installed? I’ll be following this thread for results, good luck!

08-12-2020, 01:47 AM	#3
20Bluezl1 Drives: 2020 Zl1 A10 Riverside Blue Join Date: Mar 2020 Location: NJ Posts: 1,227	I also live in jersey and thinking of Jannetty in CT to do my work. I heard mixed things about CSP just something about them that I don't like. Is that 750 rwhp?

08-12-2020, 08:20 AM	#6
soceur77 Drives: 17 NFG ZL1 17 GTR 22 RS6 Join Date: Apr 2017 Location: Upper Marlboro MD Posts: 625	I ve only dealt with CSP, actually the car is back there for additional upgrades, but my first phase of FBO, Cam, ported S/C from Kong and interchiller gave me 749WHP with no heat soak what so ever. Im excited to get the car back with low side fuel and 2650 installed. Can't find a single thing wrong with CSP other than they get alot of business therefore they may have your car longer than you expect or want, but when its done, its done right and i have no fears of flooring it and it exploding on me. Give Andrew and Alex a call, Im sure they can win you over with their professionalism and knowledge.

08-12-2020, 10:09 AM	#8
RDBill 902HP 858TQ Drives: 2018 ZL1 A10 Join Date: May 2018 Location: New Jersey Posts: 135	Nothing against CSP, but Race Proven Motorsports is right over the bridge in Delaware and they're awesome! Other than the obvious which is they do great work.... the shop is enormous which means your car stays indoors, out of the weather 100% of the time. And because it's Delaware there is no sales tax. I'm super happy with my car

08-13-2020, 03:33 AM	#13
Slickcas Drives: 12' 2SS/RS LS3 IBM Join Date: Nov 2011 Location: Odin. ILL Posts: 487 View My Garage	CSP is a good shop. Have talked to Andrew multiple time at the track. Very smart and just a funny dude.

08-13-2020, 06:45 AM	#14
Markoz28 Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018 Location: RGV Texas Posts: 1,527	Just bought a bunch of suspension stuff and spark plugs from them last night. Good prices and even better with discount code. I’ve purchased from them before with no complaints. Also I’ve spoken with their sales/tech and they are extremely helpful. They won’t advise you to buy things you don’t need. In fact things that I thought I wanted they steered me away from and towards something else and it was even less expensive. Seems that they want to do things right.

User Name		Remember Me?
Password