07-09-2017, 03:05 PM | #1 |
Drives: 2010 RJT 2SS M6 Camaro Join Date: Feb 2011
Location: Garrison,KY
Posts: 1,548
|
2010-11 Camaro Dash Panel Assembly.
I have complete Dash Panel that I removed from my 2010 2SS when I installed HUD. I replaced it with a Leather Faced one from a 2014 2SS that already had the HUD Opening and Bezel. This is from a Boston Acoustics equipped car, so it does have the opening for the Center Speaker. I do have the Center Speaker, Center Speaker Grille, HUD Bezel, HUD Cutout Template, HUD Control Switch, HUD Mounting Clips(5), Head Light Switch, Glove Box, Glove Box Damper and Support, Instrument Cluster Bezel/Upper Steering Column Cover, Dash Panel End Covers, AC Vents, Defroster Vent, Knee Bolster and Hood Release Handle, that I'm listing in separate ads, but if someone is interested, I will make them a package deal. For anyone interested in installing HUD, If you buy my Dash and associated HUD parts, the only parts that would be needed to complete a HUD install, would be a HUD projector(Monochrome or Color) from Ofer(or anyplace that sells GM parts) and a Harness from Ofer. This Dash Panel is only correct for 2010-11 models, but will fit any 5th Gen.
The GM Part# for the Dash Panel Assembly-20966083, GM List $720. Asking $250 plus shipping. PM, call or text me on 606-541-4884.
__________________
2010 RJT 2SS M6, Kooks Long Tubes, NPP Exhaust, CAI Cold Air w/Jannetty Scoop, RotoFab Washer Bottle, Elite Engineering Catch Can, MGW Shifter w/ZL1 Shaft and Knob, 2015 SS Sedan Steering Wheel and Air Bag, 2012 Heater Hose Conversion, 2012 Power Seat Conversion, RS Head Lights,Gen5DIY RS Conversion Harness, LED Fog Lamp Bulbs, Backup Camera Kit, NLP Spoiler, SLP Splitter, ZL1 Rockers and Diffuser, Color Matched Shark Fin, RS Roof Mouldings, Painted White Stripes, WCC LS3 Emblems, Heritage Grille and Blacked Out Tail Light Panel w/Retro SS Emblems, 416 RWHP, 411 RWT, Tuned by BlueCat.
Last edited by Rocky1974; 07-09-2019 at 01:03 PM. |
07-09-2019, 01:04 PM | #2 |
Drives: 2010 RJT 2SS M6 Camaro Join Date: Feb 2011
Location: Garrison,KY
Posts: 1,548
|
Bump
__________________
2010 RJT 2SS M6, Kooks Long Tubes, NPP Exhaust, CAI Cold Air w/Jannetty Scoop, RotoFab Washer Bottle, Elite Engineering Catch Can, MGW Shifter w/ZL1 Shaft and Knob, 2015 SS Sedan Steering Wheel and Air Bag, 2012 Heater Hose Conversion, 2012 Power Seat Conversion, RS Head Lights,Gen5DIY RS Conversion Harness, LED Fog Lamp Bulbs, Backup Camera Kit, NLP Spoiler, SLP Splitter, ZL1 Rockers and Diffuser, Color Matched Shark Fin, RS Roof Mouldings, Painted White Stripes, WCC LS3 Emblems, Heritage Grille and Blacked Out Tail Light Panel w/Retro SS Emblems, 416 RWHP, 411 RWT, Tuned by BlueCat.
|
07-24-2019, 12:36 AM | #3 |
|
Interested
Sent from my iPhone using Tapatalk
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
07-25-2019, 03:03 PM | #4 |
Drives: 2010 RJT 2SS M6 Camaro Join Date: Feb 2011
Location: Garrison,KY
Posts: 1,548
|
__________________
2010 RJT 2SS M6, Kooks Long Tubes, NPP Exhaust, CAI Cold Air w/Jannetty Scoop, RotoFab Washer Bottle, Elite Engineering Catch Can, MGW Shifter w/ZL1 Shaft and Knob, 2015 SS Sedan Steering Wheel and Air Bag, 2012 Heater Hose Conversion, 2012 Power Seat Conversion, RS Head Lights,Gen5DIY RS Conversion Harness, LED Fog Lamp Bulbs, Backup Camera Kit, NLP Spoiler, SLP Splitter, ZL1 Rockers and Diffuser, Color Matched Shark Fin, RS Roof Mouldings, Painted White Stripes, WCC LS3 Emblems, Heritage Grille and Blacked Out Tail Light Panel w/Retro SS Emblems, 416 RWHP, 411 RWT, Tuned by BlueCat.
|
|
|
Thread Tools | |
|
|