Design ideas input

ajp · 08-26-2016, 04:36 PM

Struggling with this summit white.

Came up with 6 designs (1-6 read left to right).

BAAD LS2 · 08-26-2016, 06:34 PM

no option for none of the above.

ajp · 08-26-2016, 06:57 PM

Quote:

Originally Posted by BAAD LS2

no option for none of the above.

Not an option, its too bland otherwise.

MiamiBlueCamaro · 08-26-2016, 07:22 PM

This

Glen e · 08-26-2016, 07:25 PM

All of them much too much surface entertainment...gaudy, at least strip the hash marks if you proceed with the others....my opin

JaxChris · 08-27-2016, 12:17 AM

The one in your sig... as long as you have the hash marks match the center stripe. The gradient counts as a 4th color in your scheme and that is too many. And your red should match your tails and reflectors if you aren't blacking them out.

Based on presence, not necessarily sq ft of coverage, so the scale is always subjective
Primary = 75-80%
Secondary = 15-20%
Tertiary = 1-5%
Quaternary+ = Never

jlcustomz · 08-27-2016, 04:15 PM

I'd say a strong maybe on the black hood stripe.
Wouldn't add red to the mirrors, just black maybe.
I'd keep playing with designs & be patient. A good idea can pop up from out of nowhere anytime.

I'd consider including some other black graphics in places other 6th gen owners have done, Maybe the center raised area under the lower grille. Have seen it red on a black car, looked interesting. Maybe some black lower side graphics.

Some spacing breaks inside some of the graphics, such as used on your old mopar cuda side upper body graphics, could add some distinguishing interest.

Just looking through pics can be confusing & mind bogling to decide on.
Others opinions can sometimes run against a choice that could be ok in real life. Sometimes just playing with tape on the actual car can be a better visualization than pictures. I don't know of any actual black masking tapes which would be easy to use & remove. Maybe a sign company may have some sort of black vinyl tape good for sampling.
Remember that at the end of the day, it's what you want. If talking vinyl graphics on cured paint, they can be easily removed if need be.

SpookShow'84 · 08-27-2016, 04:26 PM

Last one, but no red mirrors

Razor2SS · 08-27-2016, 11:17 PM

3 or 6 and go black and Red or just black on mirrors, either way it's a unique combo.

View Poll Results: Vote for design idea
Top 1	5	31.25%
Top 2	1	6.25%
Top 3	7	43.75%
Bottom 4	1	6.25%
Bottom 5	0	0%
Bottom 6	2	12.50%
Multiple Choice Poll. Voters: 16. You may not vote on this poll

08-26-2016, 04:36 PM	#1
ajp 50th Anniversary Vert Drives: Camaro 2017 50th Anniversary Join Date: Jul 2009 Location: AZ Posts: 2,315 View My Garage	Design ideas input Struggling with this summit white. Came up with 6 designs (1-6 read left to right). Attached Images __________________

08-26-2016, 07:22 PM	#4
MiamiBlueCamaro Drives: Gen 6 Camaro RS Join Date: Dec 2015 Location: Miami FL Posts: 1,725	This Attached Images

08-26-2016, 07:25 PM	#5
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	All of them much too much surface entertainment...gaudy, at least strip the hash marks if you proceed with the others....my opin __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

08-27-2016, 04:15 PM	#7
jlcustomz Drives: 83 el camaro Join Date: Feb 2011 Location: jacksonville florida Posts: 260	I'd say a strong maybe on the black hood stripe. Wouldn't add red to the mirrors, just black maybe. I'd keep playing with designs & be patient. A good idea can pop up from out of nowhere anytime. I'd consider including some other black graphics in places other 6th gen owners have done, Maybe the center raised area under the lower grille. Have seen it red on a black car, looked interesting. Maybe some black lower side graphics. Some spacing breaks inside some of the graphics, such as used on your old mopar cuda side upper body graphics, could add some distinguishing interest. Just looking through pics can be confusing & mind bogling to decide on. Others opinions can sometimes run against a choice that could be ok in real life. Sometimes just playing with tape on the actual car can be a better visualization than pictures. I don't know of any actual black masking tapes which would be easy to use & remove. Maybe a sign company may have some sort of black vinyl tape good for sampling. Remember that at the end of the day, it's what you want. If talking vinyl graphics on cured paint, they can be easily removed if need be. __________________ http://www.youtube.com/watch?v=n3mL8...6&feature=plcp https://www.flickr.com/photos/132029468@N08/

08-26-2016, 06:34 PM	#2
BAAD LS2 Drives: TBSS Join Date: Jul 2016 Location: DFW Posts: 76	no option for none of the above.

08-27-2016, 12:17 AM	#6
JaxChris Drives: '16 2SS GD1 MX0 NPP F55 IO6 Join Date: Jun 2013 Location: Florida Posts: 1,298	The one in your sig... as long as you have the hash marks match the center stripe. The gradient counts as a 4th color in your scheme and that is too many. And your red should match your tails and reflectors if you aren't blacking them out. Based on presence, not necessarily sq ft of coverage, so the scale is always subjective Primary = 75-80% Secondary = 15-20% Tertiary = 1-5% Quaternary+ = Never

08-27-2016, 04:26 PM	#8
SpookShow'84 Bump in the night Drives: '84 Monte Carlo SS, '15 Optima Join Date: Oct 2015 Location: U.S.A. Posts: 744 View My Garage	Last one, but no red mirrors __________________ https://youtu.be/Acui13Vz5Lk

08-27-2016, 11:17 PM	#9
Razor2SS Drives: 2017 1SS Join Date: Mar 2016 Location: Northeast Pennsylvania Posts: 90	3 or 6 and go black and Red or just black on mirrors, either way it's a unique combo.

User Name		Remember Me?
Password