10-28-2019, 05:27 PM | #1 |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
Katech Stage 2 LT1, 528whp NA on 93
One of our recent Gen6 Camaro customers came in for a Stage 2 head/cam/intake package. In addition to this package, we equipped the vehicle with our ported LT5 throttlebody and an ATI damper.
Note that this power was made on STOCK compression on SAE correction factors. There is a bit more power left in this mild cam build if we were to bump the compression up. Additional gains might be possible with the addition of a ported intake and 103mm throttlebody. The car picked up nearly 120whp/45trq to the tires on 93. When we switched to E85, the car improved that gain to an impressive additional 150whp/70trq. The numbers would read roughly 4% higher on STP correction factors if you are going for sheet numbers. The Katech Torquer LT1 camshaft used is extremely driveable, you will get no surging at the lower RPM levels when calibrated properly. The camshaft maintains a majority of the VVT, resulting in no low-end torque loss. This package would be ideal for any street car that wants to see the road course. The cost of this package starts at $11,200.68. https://store.katechengines.com/stag...kage-p690.aspx Last edited by Katech_Zach; 10-30-2019 at 12:35 PM. |
10-28-2019, 08:42 PM | #2 |
Drives: 21 SS Join Date: Oct 2017
Location: Dallas
Posts: 322
|
Damn nice. How can you buy cam package separately?
__________________
|
10-29-2019, 09:21 AM | #3 |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
|
10-29-2019, 06:56 PM | #4 |
Drives: like an old lady Join Date: Jun 2012
Location: indiana
Posts: 2,396
|
what exhaust is on the car? m6?
__________________
2016+ camaro: everyone’s first car
|
10-30-2019, 12:33 PM | #5 |
Drives: 2015 Z06 Join Date: Jun 2017
Location: Clinton Twp., MI
Posts: 21
|
The cam package is available here:
https://store.katechengines.com/torq...-kit-p612.aspx |
10-30-2019, 12:34 PM | #6 |
Drives: 2015 Z06 Join Date: Jun 2017
Location: Clinton Twp., MI
Posts: 21
|
|
10-30-2019, 12:35 PM | #7 | ||
Drives: 2015 Z06 Join Date: Jun 2017
Location: Clinton Twp., MI
Posts: 21
|
A couple videos on this car have been posted on our channel:
Don't forget to subscribe to our channel and hit the notification bell to be alerted when we post a new video! |
||
11-06-2019, 11:31 PM | #8 |
Drives: Rally Green LT1 Join Date: Jul 2019
Location: Eagle WI
Posts: 13
|
Wow! I just figured out what I'll be saving for. I have a couple questions.
Did this have stock manifolds or headers?? As far as raising compression, would you just mill the heads? How high would you go if someone ran E85 only? Would the stock intake covers work on the MSD intake? Thanks! Last edited by The White Devil; 11-07-2019 at 03:54 AM. |
11-08-2019, 09:22 AM | #9 | |
Drives: 14 Camaro SS 1LE Join Date: Feb 2019
Location: Clinton Twp, MI
Posts: 483
|
Quote:
The stock intake covers do not fit on the MSD. |
|
|
|
Post Reply
|
|
|