11-14-2019, 03:44 PM | #1 |
Rick's6inNJ
|
Locks and Key Fob - No Response
Hi all! I was only able to find one short thread about this from back in 2018 but wanted to see if anyone else has had this problem and what the end result or fix was...
I have a 2017 LT V6 vert and I have had this issue 3 times now over the last 2 years, always away from home. I would stop somewhere and when I returned to the car, the key fob and the proximity sensor buttons on the door handles would not work. No response whatsoever from the car. Lock/unlock, trunk opener, etc. would not work. Basically the car shut down completely. All 3 times, after about 10 minutes, everything would start working again. The one thread from 2018 said they changed the control module and it was fine. Before I go to the dealer (and they say they can't replicate the problem), any others have a similar issue? Thanks in advance! |
11-14-2019, 03:51 PM | #2 |
Drives: 2019 ZL-1 Join Date: Feb 2009
Location: Troy, MI & Naples, FL
Posts: 2,019
|
New battery in the FOB?
__________________
2019 ZL-1 Acquired 4/23/21 at 6300 miles. Riverside Blue, A10, PDR. Traded in 2017 2SS with 6M and 32k miles. Continental Extreme Contact Sports. Now has 10,000 miles...
2012 Yukon XL Denali w/ 6.2 AWD |
11-14-2019, 04:10 PM | #3 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,800
|
ive had it happen before thank god i had my phone and the mychevy.com app
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
11-14-2019, 04:42 PM | #4 |
Drives: 2017 Camaro 2LT Join Date: Sep 2019
Location: Philadelphia
Posts: 16
|
TSB 16-NA-396 fixed it for me. Had the same problem earlier this year, car would fail to detect the remote after I drove somewhere. They replace one of the modules.
|
11-15-2019, 07:20 AM | #5 |
Rick's6inNJ
|
|
11-15-2019, 07:21 AM | #6 |
Rick's6inNJ
|
|
12-06-2019, 11:36 AM | #7 |
Rick's6inNJ
|
Finally had a new control module put into the center console yesterday (they had to order one) and lets hope this works. I mentioned TSB 16-NA-396 and that is what the tech referenced in the notes on the work order.
|
|
|
Post Reply
|
Thread Tools | |
|
|