11-12-2018, 04:43 PM | #1 |
New Personal Best
Made it to the track on Sunday and with -1400 DA! finally got into the 1.6's 60 foot! just barely! But I will take it! So Big Dave was there and with DR's, CAI and a PTB he is still faster than I am!!! I had a discussion with him about torque management... I guess that could be the problem! Or he just has a faster ZL1! lol All in all it was a good day! Good to have a personal best before she gets put away for winter!
|
|
11-12-2018, 04:54 PM | #2 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Nice pass and congrats.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-12-2018, 04:57 PM | #3 |
Drives: Chevys at the limit Join Date: Nov 2010
Location: SLC, UT
Posts: 9,621
|
Not bad at all! Nicely done .
Cheers, Kayla L. 801.545.4215 |
11-12-2018, 04:59 PM | #4 |
11-12-2018, 05:04 PM | #5 |
Drives: 2018 camaro ss Join Date: Aug 2013
Location: United States
Posts: 578
|
Nice congratulations
__________________
2019 charger scatpack FBO 11.16@122
2020 CAMARO LT1 6spd 11.02@ 135 dragy approved |
11-12-2018, 05:35 PM | #6 |
11-12-2018, 06:12 PM | #7 | |
Drives: 2017 ZL1 Join Date: Aug 2009
Location: Maryland
Posts: 1,052
|
Quote:
__________________
'17 ZL1 10.99@129 stock. 4225# raceweight. Best 60'- 1.66 on factory tires. 10.48@132 E50, intake and tune. 4270 lbs
https://youtu.be/EyHtdH9XOkY https://youtu.be/Lcu41obbTf8 '13 ZL1 BRM A6. 11.591 @ 119.2 factory stock with a 1.68 60'! Best stock mph 121.8. 11.29 @ 123 RotoFab, drag radials and skinnies. 4360# raceweight. http://youtu.be/yggIA3C_kkA 2014... back to stock http://youtu.be/spQLaTWbThs 2013... stock & RotoFab |
|
11-12-2018, 06:35 PM | #8 | |
Quote:
|
||
11-12-2018, 07:53 PM | #9 |
Tactical Garage
Drives: 2016 Camaro 2SS Join Date: Nov 2016
Location: Idaho
Posts: 427
|
Congrats on the time. On the door step of 10s.
|
11-12-2018, 08:18 PM | #10 |
11-12-2018, 09:49 PM | #11 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Are you leaving right off idle or bringing the rpms up on the converter and then launching. My best 60' and my 10.03@138 was right off idle, I've tried every rpm up to 2k and never had a 60' below 1.55, leaving right off idle mine consistently is 1.45 to 1.50.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
Thread Tools | |
|
|