09-21-2020, 12:05 PM | #1 |
Drives: 2016 Camaro SS in Red Hot Join Date: Apr 2016
Location: Mesa, AZ
Posts: 275
|
Dead Pedal Removal
I've seen videos of people who replaced their accelerator, brake and clutch pedals with upgraded units (or just due to wear), but they don't seem to include the dead pedal. I get the idea that people just do a glued-in inlay if they want to upgrade the dead pedal. I've poked around under the dash enough to discover there's a big styrofoam block behind the carpet under the dead pedal. Is the pedal itself easily removable/replaceable?
|
09-21-2020, 12:53 PM | #2 |
Drives: 2016 1ss camaro Join Date: Feb 2016
Location: 909
Posts: 9,816
|
there was a guy on here that made replacement pedal covers and a dead pedal also but gm only sells the pedal covers
__________________
16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS
|
09-24-2020, 05:44 PM | #3 |
Drives: 2020 Camaro SS 1LE Join Date: Aug 2020
Location: Florida
Posts: 107
|
Check out SRPRACING.com. Have used them on my Trailblazer and Sierra. They are top notch.
|
09-25-2020, 12:03 AM | #4 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,606
|
Quote:
I ended up doing the inlay, because it was way simpler and cheaper than trying to adapt something from a Cadillac or a truck.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
|
|
Post Reply
|
|
|