Couple Videos from TNT at WWTraceway Sunday

laynlo15 · 03-28-2023, 12:05 AM

These are videos from WWtraceway. The 9.86@142 pass was with the 95mm pulley on about 11.3 psi of boost and the 10.02@140 was with a 98mm was about 9.8 psi of boost pulley on the same tune.

Joshinator99 · 03-28-2023, 07:20 AM

Links didn’t work for me…?

Mark114 · 03-28-2023, 07:45 AM

It doesn’t work for me either. I copied the entire link and pasted it into a new browser page. The web site posted an error: “This content isn't available at the moment”

SSDan · 03-28-2023, 07:52 AM

Same for me.

laynlo15 · 03-28-2023, 08:00 AM

Huh, just clicked on them and they worked. Someone else shot the videos and sent them to me in messenger.

laynlo15 · 03-28-2023, 08:09 AM

https://www.youtube.com/shorts/cwRcJMChQxA

Mark114 · 03-28-2023, 08:14 AM

Quote:

Originally Posted by laynlo15

Huh, just clicked on them and they worked. Someone else shot the videos and sent them to me in messenger.

My guess is that the links to the videos are tied to your FB account and that’s why they don’t work for us. Maybe you can download the videos from FB Messenger and then upload them to Camaro6? Either way I’m glad to hear that you had a good day!

laynlo15 · 03-28-2023, 08:37 AM

I just posted one from youtube. I'll post the other later.

laynlo15 · 03-28-2023, 10:22 AM

Reposed in my initial thread with a new video from the track.

Mark114 · 03-28-2023, 10:29 AM

The new video works for me. Awesome runs!

laynlo15 · 03-28-2023, 10:42 AM

Quote:

Originally Posted by Mark114

The new video works for me. Awesome runs!

Thanks, my car is so quiet you can't hear it after the launch as the Mustang is so loud. He ran 10.005

JTS · 03-28-2023, 12:49 PM

Very nice an respectful with your setup, great job
Worked for me. Thanks for sharing

laynlo15 · 03-28-2023, 01:09 PM

Quote:

Originally Posted by JTS

Very nice an respectful with your setup, great job
Worked for me. Thanks for sharing

My 16ss was almost an identical setup when I first did the 2300 Maggie back in 2017. We ran the best of 10.92@129 with almost the identical weight including the Racestar drag pack and Hoosiers front and rear, that included the RotoFab CAI, we were running 93 octane in the beginning. So, if you look at those numbers compared to this car that ran the 9.86@142 it pretty impressive pick up and really the big difference is the TooHighPsi Port injection and running E65, that's basically 1 second and 13 mph pick up. It's probably a little quicker with the A10 than the A8 but not substantial.

302crossram · 03-28-2023, 02:22 PM

the A10 is king on the 1320

03-28-2023, 07:20 AM	#2
Joshinator99 Drives: 2017 Camaro 2SS A8 Join Date: Aug 2018 Location: Petersham MA Posts: 4,741	Links didn’t work for me…? __________________ 2017 Chevy Camaro 2SS A8 Whipple 3.0, Mast Black Label heads, Fore triple in-tank pumps, 112mm TB, LPE +52% injectors, LPE BB HPFP, 15” conversion *1059 WHP/944 WTQ, 9.48@150*

03-28-2023, 07:52 AM	#4
SSDan Drives: 2016 1SS 6MT NPP Join Date: Feb 2010 Location: Lake Murray, SC Posts: 2,243 View My Garage	Same for me. __________________ 2016 Camaro 1SS Hyper Blue 6MT NPP 2010 Camaro 2SS Cam/Headers/CAI/3.91 gears 476 rwhp/440 rwtq (sold)

03-28-2023, 08:00 AM	#5
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Huh, just clicked on them and they worked. Someone else shot the videos and sent them to me in messenger. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

03-28-2023, 08:09 AM	#6
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	https://www.youtube.com/shorts/cwRcJMChQxA __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

03-28-2023, 08:37 AM	#8
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I just posted one from youtube. I'll post the other later. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

03-28-2023, 07:45 AM	#3
Mark114 Drives: 2016 2SS Convertible Join Date: May 2012 Location: St. Louis, MO Posts: 1,710 View My Garage	It doesn’t work for me either. I copied the entire link and pasted it into a new browser page. The web site posted an error: “This content isn't available at the moment”

03-28-2023, 10:22 AM	#9
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Reposed in my initial thread with a new video from the track. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

03-28-2023, 10:29 AM	#10
Mark114 Drives: 2016 2SS Convertible Join Date: May 2012 Location: St. Louis, MO Posts: 1,710 View My Garage	The new video works for me. Awesome runs!

03-28-2023, 12:49 PM	#12
JTS Drives: 2023 ZL1 A10 Join Date: Nov 2021 Location: Az Posts: 624	Very nice an respectful with your setup, great job Worked for me. Thanks for sharing __________________ 2023 ZL1 A10 Shadow Gray Metallic

03-28-2023, 02:22 PM	#14
302crossram Drives: 2023 Sharkskin 2SS Join Date: Oct 2022 Location: NWFL Posts: 758	the A10 is king on the 1320

User Name		Remember Me?
Password