Fender Emblems - Page 3

Zapote21 · 04-18-2020, 07:32 PM

Quote:

Originally Posted by 17rsvert

Looks great! I might try that on mine.

Didn't want the same on your present car?

My 2020 came with these, so I havent decided if I will change it

Sent from my iPad using Tapatalk Pro

arpad_m · 04-18-2020, 08:06 PM

Quote:

Originally Posted by Zapote21

My 2020 came with these, so I havent decided if I will change it

These two look too busy together IMO.

I'd (and actually will) remove the chrome emblem, the bumper center support under the hood will be a great place for one, and the other may go up onto the garage wall, not sure yet.

Jaxcam02 · 04-18-2020, 08:12 PM

I bought my car used and the previous owner removed the original ones. Im not a fan of debadging or the factory ones so I ordered these from emblempros.

GM-ACE · 04-19-2020, 12:01 AM

I decided to embrace the blackout theme

Jbanta1983 · 04-19-2020, 08:32 AM

I moved the ss emblem to the trunk lid like the 1st gen Camaro then put the 1le badge on the bumper.

SSShark · 04-19-2020, 09:24 AM

Quote:

Originally Posted by STYLO LT1

Attachment 1028134

That looks awesome!!

Zapote21 · 04-19-2020, 09:25 AM

Quote:

Originally Posted by arpad_m

These two look too busy together IMO.

I'd (and actually will) remove the chrome emblem, the bumper center support under the hood will be a great place for one, and the other may go up onto the garage wall, not sure yet.

I agree. If I leave these, I will remove the chrome one and leave the black letters

RobbyBeefcake87 · 04-19-2020, 09:38 AM

I've gone emblem less and love it, no ss badges on the front or rear or camaro badge on the fenders. The plan was to go with black ss emblems but when I removed the red oem badges it just looked so good and clean without badges.

It still has the black bowties in the front and rear so it doesn't have the incomplete look of a totallt badgeless car.

If some one can't tell it's an ss I don't really care. The exhaust and fat 305 tires should kind of be an indicator of a v8 if they don't recognize the differences in grills between the models.

I did add a black 1le licence plate frame which really adds to the look and makes the rear pop but it's nice and centered unlike the original ss badge.

Couple the debadging with black oem tails + 3rd brake light, as well as the ghost rear reflectors from wildhammer, plus the clear euro side markers and it's a pretty damn unique looking 6th gen.

rshelar · 04-19-2020, 10:25 AM

I too took mine off. There is a body line in the sheetmetal on the gen 5 cars but there is nothing on the gen 6.

Dark Phoenix · 04-19-2020, 11:20 AM

Quote:

Originally Posted by Zapote21

My 2020 came with these, so I havent decided if I will change it

Sent from my iPad using Tapatalk Pro

I’d get rid of the chrome square shield logo for sure.

caSStro18 · 04-19-2020, 11:37 AM

Quote:

Originally Posted by Dark Phoenix

I’d get rid of the chrome square shield logo for sure.

Yeah. Seems a bit redundant to have two Camaro’s right next to each other.

STYLO LT1 · 04-19-2020, 01:04 PM

Quote:

Originally Posted by 8minus4

That looks awesome!!

Thank you

STYLO LT1 · 04-19-2020, 01:08 PM

Quote:

Originally Posted by Jbanta1983

I moved the ss emblem to the trunk lid like the 1st gen Camaro then put the 1le badge on the bumper.

I thought I wouldn’t like that, but I think it looks awesome now that I’ve actually seen it. Thanks for sharing.

arpad_m · 04-19-2020, 01:34 PM

Just installed the heritage black Camaro fender emblems, see my post in this thread.

04-18-2020, 08:12 PM	#31
Jaxcam02 Drives: 2017 Silverado/2017 ZL1 Join Date: Aug 2019 Location: Jax/Palatka FL Posts: 1,090	I bought my car used and the previous owner removed the original ones. Im not a fan of debadging or the factory ones so I ordered these from emblempros. Attached Images __________________

04-19-2020, 12:01 AM	#32
GM-ACE Old school tech Drives: Ruby 1LE - 2024 2SS 1LE Join Date: Mar 2014 Location: San Antonio, TX Posts: 288 View My Garage	I decided to embrace the blackout theme Attached Images

04-19-2020, 08:32 AM	#33
Jbanta1983 Drives: 2019 2ss 1LE Join Date: Mar 2019 Location: Kennett square, PA Posts: 307	I moved the ss emblem to the trunk lid like the 1st gen Camaro then put the 1le badge on the bumper. Attached Images

04-19-2020, 09:38 AM	#36
RobbyBeefcake87 Drives: 2018 Camaro SS 1LE Join Date: Aug 2018 Location: Tampa Florida Posts: 1,980	I've gone emblem less and love it, no ss badges on the front or rear or camaro badge on the fenders. The plan was to go with black ss emblems but when I removed the red oem badges it just looked so good and clean without badges. It still has the black bowties in the front and rear so it doesn't have the incomplete look of a totallt badgeless car. If some one can't tell it's an ss I don't really care. The exhaust and fat 305 tires should kind of be an indicator of a v8 if they don't recognize the differences in grills between the models. I did add a black 1le licence plate frame which really adds to the look and makes the rear pop but it's nice and centered unlike the original ss badge. Couple the debadging with black oem tails + 3rd brake light, as well as the ghost rear reflectors from wildhammer, plus the clear euro side markers and it's a pretty damn unique looking 6th gen. __________________ 2000 Miata - aventi storm wheels, roll bar. 2019 Mustang GT pp1 - svt pp2 wheels, mbrp cat back, sync 3 upgrade, p1x procharger + stg2 intercooler. 2018 Colorado zr2 - zr2 sport bar, showcase spare tire. 2018 Camaro SS 1LE - GM cai, black bowties, suede knee bolsters, 1le plate frame, black fuel door, dark tails + 3rd brake light, euro side markers + led's, GM all weather floor mats, velossatech big mouth, GM strut brace. 2017 Corvette Grandsport (sold) - untouched. 2006 GTO (sold) - iat relocation, air box mod, monero side marker lights.

04-19-2020, 01:34 PM	#42
arpad_m Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017 Location: East Tennessee Posts: 11,625 View My Garage	Just installed the heritage black Camaro fender emblems, see my post in this thread. __________________ 2018 Camaro 2SS — G7E MX0 NPP F55 IO6 735 rwhp \| 665 rwtq Magnuson TVS 2300 80mm pulley \| Kooks 1 7/8" LT headers \| JRE smooth idle terminator cam \| LT4 FS & injectors \| TSP forged pistons & rods JMS PowerMAX \| DSX flex fuel kit \| Roto-Fab CAI \| Soler 95mm LT5 TB \| 1LE wheels \| 1LE brakes \| BMR rear cradle lockout \| JRE custom tune 1100 - 1/30/18 \| 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 \| 3800 - 2/26/18 4300 - 2/27/18 \| 4B00 - 3/01/18 4200 - 3/05/18 \| 4800 - 3/14/18 5000 - 3/16/18 \| 6000 - 3/19/18

04-19-2020, 10:25 AM	#37
rshelar Drives: 2017 1SS auto vert Nightfall Gray Join Date: Jan 2017 Location: Central Coast, CA Posts: 666 View My Garage	I too took mine off. There is a body line in the sheetmetal on the gen 5 cars but there is nothing on the gen 6.

User Name		Remember Me?
Password