07-01-2020, 08:37 PM | #1 |
Drives: chevy camaro Join Date: Jan 2019
Location: minnesota
Posts: 13
|
new wheels 20x10 20x11 MRC what tire size?
i just joined the forum and didnt see there was a tire and wheel page.
im getting 20x10 and 20x11 the offset is +23 +43 they are STANCE WHEEL SF07s. i also have mag ride with stock height. should i do 285/35 305/30 or 275/35? i kept seeing that i cant with mag ride. will rub. Hear you have to cut the rear axle bolt? thank you! Last edited by its_giooo1; 07-02-2020 at 11:44 AM. Reason: Added more info |
07-01-2020, 10:16 PM | #2 |
Drives: 2023 CT5 Blackwing Join Date: Sep 2016
Location: Orlando
Posts: 1,617
|
20x10" and 11" are the standard sizes for the SS 1LE and ZL1.
That tire size is 285/30 and 305/30. The /35 is too tall. You ordered wheels and don't know the offset? The 1LE OEM offsets are: (F) 20, (R) 43
__________________
2017 HBM SS 1LE
Sold 2023 Wave Metallic CT5-V Blackwing M6 |
07-02-2020, 11:43 AM | #3 |
Drives: chevy camaro Join Date: Jan 2019
Location: minnesota
Posts: 13
|
Just got off the phone and the offset is +23 +43 !!
|
07-02-2020, 02:07 PM | #4 |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,574
|
The standard "convention" that most people go with is 285/30/20 front, 305/30/20 rear with those aftermarket wheel sizes and offsets, very similar to the SS 1LE setup.
I wanted a bit more sidewall than that and less difference from stock SS MRC sizes, so I settled on 275/35/20 front and 315/30/20 rear, which works perfectly and looks killer with those steamroller style rears. Change from stock is only 3-4 revs per mile in the same direction, little to no impact on rake and stability under high load, and I've just finished a 1000-mile roadtrip with zero issues.
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
07-02-2020, 03:59 PM | #5 | |
Drives: chevy camaro Join Date: Jan 2019
Location: minnesota
Posts: 13
|
Quote:
thank you so much for the info!!!!!!! |
|
07-02-2020, 11:23 PM | #6 | |
Drives: 2018 Camaro 2SS A8 Join Date: Jul 2017
Location: East Tennessee
Posts: 11,574
|
Quote:
As to front sizes, 275/30 will be too short and may cause stabilitrak/ABS issues when paired with 315/30 in the rear, because the front end will be 4.3% shorter while the rear only by 0.7%. You will also lose almost 18% of your front sidewall, so I bet the ride will be tangibly worse. I'd say either simply go with the SS 1LE specs, or have 35 aspect ratio in the front. I can recommend my setup, it works perfectly well; if you want to fill the wheel wells a bit more, you can do 285/35 fronts (with small spacers) paired with 325/30 rears, it will still work fine. (https://tiresize.com/comparison and https://www.wheel-size.com are your friends.)
__________________
2018 Camaro 2SS — G7E MX0 NPP F55 IO6
735 rwhp | 665 rwtq Magnuson TVS 2300 80mm pulley | Kooks 1 7/8" LT headers | JRE smooth idle terminator cam | LT4 FS & injectors | TSP forged pistons & rods JMS PowerMAX | DSX flex fuel kit | Roto-Fab CAI | Soler 95mm LT5 TB | 1LE wheels | 1LE brakes | BMR rear cradle lockout | JRE custom tune 1100 - 1/30/18 | 2000 - 1/31/18 3000 - 2/06/18 TPW 2/26/18 3400 - 2/19/18 | 3800 - 2/26/18 4300 - 2/27/18 | 4B00 - 3/01/18 4200 - 3/05/18 | 4800 - 3/14/18 5000 - 3/16/18 | 6000 - 3/19/18 |
|
07-05-2020, 08:52 PM | #7 |
sergecr7
Drives: chevrolet camaro 2.0 manual Join Date: Jun 2020
Location: canada
Posts: 60
|
315/35/20 275/40/20
hi guys.
im new to this forum.i have a camaro 2.0.i ordered new wheels set mrr m650 20X10 20x11.i was wondering if 3-5/35/20 rear et43 and 275/40/20 front et 23 will fir on them.thank u |
|
|
Post Reply
|
Tags |
offset, wheels, wheels and tires |
Thread Tools | |
|
|