Sport Pedal Kit Install

Z06jpb · 08-03-2016, 08:00 PM

Just got the factory sport pedal kit from the dealer. Install looks easy enough but there is a note within the package that states "installation of this part may require reprogramming of the ECM, refer to tech installation guide".

So in reference to the gas pedal, are all of them created equal? I know the pedal itself does have a module of some type on it but are all pedals just plug and play? I'm thinking if the electric resistance is slightly different, the signal sent back to the computer might be off, causing a lack (or gain) in throttle response if ever so slightly..

I guess I'll have to make my way to the dealer and ask to see what their tech manual states that needs to be done.

Richard0nee · 08-03-2016, 08:04 PM

Pics??

BradfordCamaro · 08-03-2016, 08:47 PM

Pics. Had these on backorder for 8 weeks....then cancelled.
They came out 2 weeks after. Figures.

brutusvk · 08-03-2016, 09:03 PM

They have that disclaimer on all the accessories. It had it on my sill plates and something non electrical I ordered too.

Z06jpb · 08-03-2016, 09:24 PM

HyperBlueX2 · 08-04-2016, 05:14 AM

Here is the auto version.....

I just installed them.... Didn't touch ecm.... No CEL.....

somewhatdamaged · 08-04-2016, 01:45 PM

Are those basically pasted on top of the stock pedals or full replacement? How easy was the install?

Thanks!

Richard0nee · 08-04-2016, 02:17 PM

Looks good! I may get a set of Sparco pedal covers so who knows..

HyperBlueX2 · 08-04-2016, 02:52 PM

Quote:

Originally Posted by somewhatdamaged

Are those basically pasted on top of the stock pedals or full replacement? How easy was the install?

Thanks!

The gas pedal is a complete replacement. Remove one bolt, slide out of notch, unplug harness, reverse order install. Brake and clutch you remove rubber pad and install new rubber pad. Gen 5 manual was a bugger. the Gen 6 auto brake pedal had a rubber flap to grab. Much easier. Not sure on Gen 6 manual set up......

somewhatdamaged · 08-04-2016, 03:04 PM

Quote:

Originally Posted by Hyperblue16vert

The gas pedal is a complete replacement. Remove one bolt, slide out of notch, unplug harness, reverse order install. Brake and clutch you remove rubber pad and install new rubber pad. Gen 5 manual was a bugger. the Gen 6 auto brake pedal had a rubber flap to grab. Much easier. Not sure on Gen 6 manual set up......

Thanks for the info!

Z06jpb · 08-04-2016, 06:32 PM

Got to drive today and noticed no difference in the pedal response or feel.

LesserO2Evils · 08-04-2016, 11:50 PM

Looks just like whats in the ATS.

V8Addict · 09-28-2016, 06:47 AM

Anyone know if there is a cover or replacement for the dead pedal? Wondering if any of the Cadillac ATS covers would fit.

F1FTY · 12-14-2016, 08:05 PM

Just did this install and it is super easy. Only advice I have is when you are doing the brake pedal, start from the right side (closest to the gas pedal). The slip on fit will go on quicker/easier this way.

08-03-2016, 08:00 PM	#1
Z06jpb Drives: 2016 Camaro 1SS M6 - hyper blue Join Date: Jul 2016 Location: Missouri Posts: 7	Sport Pedal Kit Install Just got the factory sport pedal kit from the dealer. Install looks easy enough but there is a note within the package that states "installation of this part may require reprogramming of the ECM, refer to tech installation guide". So in reference to the gas pedal, are all of them created equal? I know the pedal itself does have a module of some type on it but are all pedals just plug and play? I'm thinking if the electric resistance is slightly different, the signal sent back to the computer might be off, causing a lack (or gain) in throttle response if ever so slightly.. I guess I'll have to make my way to the dealer and ask to see what their tech manual states that needs to be done. __________________ Past Fun Cars 1985 Fiero GT Auto 1992 Camaro Z28 5.0 Hardtop 5-speed 1992 Camaro Z28 5.0 T-top Auto 1992 Camaro Z28 5.0 Hardtop 5-speed w/B4C 1996 Corvette CE LT4 6-speed 1999 Camaro Z28 6-speed 2001 Corvette Z06 2002 Trans Am WS6 6-speed 2003 Corvette Z06 2013 Challenger R/T 6-speed w/track pack

08-03-2016, 08:47 PM	#3
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Pics. Had these on backorder for 8 weeks....then cancelled. They came out 2 weeks after. Figures. __________________

08-03-2016, 09:24 PM	#5
Z06jpb Drives: 2016 Camaro 1SS M6 - hyper blue Join Date: Jul 2016 Location: Missouri Posts: 7	__________________ Past Fun Cars 1985 Fiero GT Auto 1992 Camaro Z28 5.0 Hardtop 5-speed 1992 Camaro Z28 5.0 T-top Auto 1992 Camaro Z28 5.0 Hardtop 5-speed w/B4C 1996 Corvette CE LT4 6-speed 1999 Camaro Z28 6-speed 2001 Corvette Z06 2002 Trans Am WS6 6-speed 2003 Corvette Z06 2013 Challenger R/T 6-speed w/track pack

08-04-2016, 05:14 AM	#6
HyperBlueX2 Drives: '22 Silverado 2500HD Duramax LTZ Join Date: Dec 2015 Location: Millington, MI Posts: 4,775 View My Garage	Here is the auto version..... I just installed them.... Didn't touch ecm.... No CEL..... Attached Images __________________

08-04-2016, 06:32 PM	#11
Z06jpb Drives: 2016 Camaro 1SS M6 - hyper blue Join Date: Jul 2016 Location: Missouri Posts: 7	Got to drive today and noticed no difference in the pedal response or feel. __________________ Past Fun Cars 1985 Fiero GT Auto 1992 Camaro Z28 5.0 Hardtop 5-speed 1992 Camaro Z28 5.0 T-top Auto 1992 Camaro Z28 5.0 Hardtop 5-speed w/B4C 1996 Corvette CE LT4 6-speed 1999 Camaro Z28 6-speed 2001 Corvette Z06 2002 Trans Am WS6 6-speed 2003 Corvette Z06 2013 Challenger R/T 6-speed w/track pack

08-03-2016, 08:04 PM	#2
Richard0nee Drives: 2016 SS M6, NPP Join Date: Apr 2016 Location: Hawthorne, CA Posts: 1,957	Pics??

08-03-2016, 09:03 PM	#4
brutusvk Drives: future 2016 SS Join Date: Sep 2015 Location: Glendale, AZ Posts: 847	They have that disclaimer on all the accessories. It had it on my sill plates and something non electrical I ordered too.

08-04-2016, 01:45 PM	#7
somewhatdamaged Drives: 16' 2SS M6 Join Date: Feb 2010 Location: Earth Posts: 573	Are those basically pasted on top of the stock pedals or full replacement? How easy was the install? Thanks!

08-04-2016, 02:17 PM	#8
Richard0nee Drives: 2016 SS M6, NPP Join Date: Apr 2016 Location: Hawthorne, CA Posts: 1,957	Looks good! I may get a set of Sparco pedal covers so who knows..

08-04-2016, 11:50 PM	#12
LesserO2Evils GM repeat offender... Drives: 16 2SS Join Date: Dec 2014 Location: Grandview, Texas Posts: 1,474	Looks just like whats in the ATS. __________________ '16 2SS, Summit White. A8. MRC. NPP. Ordered:09/03/15. Received 12/22/15 INCOMING: ‘22 ZL1, Satin Steel. A10. PDR. Ordered: 03/02/22.

09-28-2016, 06:47 AM	#13
V8Addict Drives: 2016 2SS Join Date: Feb 2010 Location: So Calif Posts: 324	Anyone know if there is a cover or replacement for the dead pedal? Wondering if any of the Cadillac ATS covers would fit. __________________ 2016 Hyper Blue 2SS, A8, NPP, MRC

12-14-2016, 08:05 PM	#14
F1FTY Drives: 2018 ZL1 Join Date: Oct 2016 Location: At the Dealership Posts: 1,019 View My Garage	Just did this install and it is super easy. Only advice I have is when you are doing the brake pedal, start from the right side (closest to the gas pedal). The slip on fit will go on quicker/easier this way. __________________ It's been fun, done with GM. 2018 Camaro ZL1 (SOLD) - Blown Airbags 2017 Camaro SS F1FTY Member Journal (SOLD) - Bad Motor

User Name		Remember Me?
Password