Finally, I got Maggi 2650 for Lt1 - Page 3

shinysun · 09-24-2019, 10:35 PM

Quote:

Originally Posted by laynlo15

What mods are done the motor? That's a lot of rwhp.

Just forged pistons and rods with ported heads, mteh, cam and 103.

Do I need the corner bolts?

wnta1ss · 09-25-2019, 06:31 AM

Quote:

Originally Posted by Drsagacity

Look at the recent posts about the port injection on the “other non-Maggie 2650”. Running port injection, with alky, with back seats pulled and running Cxx race fuel...the 2650 beat the 2300 Maggie time by what, .001s?

The Edelbrock 2650-equipped car broke the transmission during the run and still went 8.99, the car that you are talking about with the race 2300R Magnuson on a 416 motor has also broken a transmission before, but not during his 9.07 pass. Seems that this much power/torque is making things hard on the stock transmissions under hard use.

laynlo15 · 09-25-2019, 07:04 AM

No broken tranny on Mikes 9.07 pass, it had a Steven Rankin trans and was launching in 2nd gear as they couldn't get it to hook in 1st gear. He ran 9.06, 9.07 and 9.08 at over 153 mph. The car was at full weight plus with full cage, chute, etc. I know it was close to 4,000 lbs with driver which is heavy for a 1ss.
I think the Eforce was running NOS also. It was really fast for sure.

ramairroughneck · 09-25-2019, 11:37 AM

Quote:

Originally Posted by laynlo15

No broken tranny on Mikes 9.07 pass, it had a Steven Rankin trans and was launching in 2nd gear as they couldn't get it to hook in 1st gear. He ran 9.06, 9.07 and 9.08 at over 153 mph. The car was at full weight plus with full cage, chute, etc. I know it was close to 4,000 lbs with driver which is heavy for a 1ss.
I think the Eforce was running NOS also. It was really fast for sure.

He showed a video inside the car and under the hood on the FB groups showing nothing but a methanol injection and pulled seats when he ran 8.9. If he used nitrous it was hidden well.

laynlo15 · 09-25-2019, 11:51 AM

I thought in another post someone had said NOS. Even more impressive if it didn't

KingLT1 · 09-25-2019, 01:37 PM

No it didn't have Nitrous...

laynlo15 · 09-25-2019, 02:04 PM

Maybe he'll get the tranny back in and give it another shot.

09-25-2019, 07:04 AM	#31
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	No broken tranny on Mikes 9.07 pass, it had a Steven Rankin trans and was launching in 2nd gear as they couldn't get it to hook in 1st gear. He ran 9.06, 9.07 and 9.08 at over 153 mph. The car was at full weight plus with full cage, chute, etc. I know it was close to 4,000 lbs with driver which is heavy for a 1ss. I think the Eforce was running NOS also. It was really fast for sure. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

09-25-2019, 11:51 AM	#33
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	I thought in another post someone had said NOS. Even more impressive if it didn't __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

09-25-2019, 01:37 PM	#34
KingLT1 Drives: 2016 1SS NFG A8 Join Date: Aug 2017 Location: 46804 Posts: 6,799	No it didn't have Nitrous... __________________ 2016 NFG 1SS A8 Options-2SS Leather/NPP Perf. mods-Whipple 2.9/Fuel System/Flex Fuel/103mm TB/Rotofab Big Gulp/Cat Deletes/Corsa NPP Per. times- 10.5 @ 137 w/ 1.8 60ft Full weight on 20's 1200DA

09-25-2019, 02:04 PM	#35
laynlo15 Drives: 2022 Lt1 A10 Join Date: Nov 2015 Location: clark, mo Posts: 8,860	Maybe he'll get the tranny back in and give it another shot. __________________ 2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff

User Name		Remember Me?
Password