10-26-2015, 04:09 PM | #1 |
Drives: 2014 Crystal Red 1LE 2SS Join Date: Jun 2015
Location: US
Posts: 131
|
Need help with clean oil separator install
Hey guys. I bought my 1LE used and the gm separator was in the trunk but without instructions. I have a K&N cai and just want to be sure I'm hooking it up correctly. I'm assuming the hose in my picture goes to the separator correct? And the cap goes on where the hose was connected?
Anybody have a copy of the instructions they wouldn't mind sending me pics of? Thanks for any help |
10-26-2015, 08:42 PM | #2 |
War Horse Pilot
|
Hose attaches in the back of the oil separator, then runs to the CAI. The end that the CAI currently plugs into other connection in the passenger side head gets blocked with the rubber end cap. The oil separator then replaces the oil cap.
Follow me? |
10-26-2015, 08:50 PM | #3 |
Drives: 2014 Crystal Red 1LE 2SS Join Date: Jun 2015
Location: US
Posts: 131
|
Gotcha. Thanks I appreciate it.
Someone emailed me the factory instructions earlier so now I'm good to go. |
10-26-2015, 08:51 PM | #4 |
War Horse Pilot
|
Forgive the bad cell pic. But you should get the idea hopefully.
|
10-26-2015, 08:52 PM | #5 |
War Horse Pilot
|
|
|
|
|
|