16-18 splitter work on 19's?

AshenBatmobile · 02-15-2019, 02:52 PM

Just bought a 2019 SS and I'm planning on getting a front splitter for it. Don't see too much in options right now. Does the 16-18 fit?

Tha_Infamous_E · 02-15-2019, 07:05 PM

Lol? Have you seen the entirely different bumper on the 19s or what?

AshenBatmobile · 02-15-2019, 08:14 PM

Yes I have seen both bumpers. They are different from the front .
However, if you look at the bottom part of it where the splitter is attached, it seems to follow a similar line. I think it looks pretty close.
Look at the yellow line and below. I know above the line it's different.

P.s. I hope it was ok to borrow these pictures. If not please let me know or delete post.

EMTNLSS · 02-16-2019, 05:53 AM

The gen 2 splitter that's on the right in that picture works on the 16-18 so I would assume it would work in reverse.

Tha_Infamous_E · 02-16-2019, 06:08 PM

Quote:

Originally Posted by AshenBatmobile

Yes I have seen both bumpers. They are different from the front .
However, if you look at the bottom part of it where the splitter is attached, it seems to follow a similar line. I think it looks pretty close.
Look at the yellow line and below. I know above the line it's different.

P.s. I hope it was ok to borrow these pictures. If not please let me know or delete post.

Honestly, all it takes is a few millimeters difference in size for it to be ineffective - you can't simply tell my just eyeing it or drawing lines on MS Paint around the bumper. I'm fairly sure with the amount of changes they made on the 2019 model bumper, you're more than likely not going to find a perfect match between the two even though they look really close/similar.

chaospiece · 02-16-2019, 08:51 PM

Well the 19 splitter fits the previous years. There's a thread on here about it, so they should all work.

AshenBatmobile · 02-16-2019, 10:56 PM

Quote:

Originally Posted by chaospiece

Well the 19 splitter fits the previous years. There's a thread on here about it, so they should all work.

Thanks for the input. Care to point me in the direction of that thread please. I've been searching and cant find it.

Thanks.

chaospiece · 02-17-2019, 02:27 AM

Here you go
https://www.camaro6.com/forums/showthread.php?t=540728

kropscamaro16 · 02-18-2019, 10:58 AM

somebody already did it it fits but ehhh not sold on it lol

bigwormgraphix · 02-25-2019, 09:43 AM

The C7 Carbon splitter will fit 2019 Camaros, we tested one last month.

https://screamingchicken.com/2016-19...-zl1-splitter/

Luis19SS · 02-27-2019, 03:42 PM

Quote:

Originally Posted by bigwormgraphix

The C7 Carbon splitter will fit 2019 Camaros, we tested one last month.

https://screamingchicken.com/2016-19...-zl1-splitter/

So does that mean other manufacturer splitters that resemble the zl1 splitter will work?

bigwormgraphix · 02-27-2019, 03:55 PM

Quote:

Originally Posted by Luis13RS

So does that mean other manufacturer splitters that resemble the zl1 splitter will work?

No idea on that one, depends on how they mount to the bumper.

chaospiece · 02-27-2019, 09:19 PM

Definitely depends on bumper mounting.
Zl1 splitters wrap around the bottom to the front of the bumper.

Airfuel · 02-28-2019, 06:49 AM

Here is an oem version for ‘19 models.

https://accessories.chevrolet.com/se...cts?sortId=top

02-15-2019, 02:52 PM	#1
AshenBatmobile Drives: 2019 SS Join Date: Jan 2014 Location: San diego Posts: 57	16-18 splitter work on 19's? Just bought a 2019 SS and I'm planning on getting a front splitter for it. Don't see too much in options right now. Does the 16-18 fit?

02-15-2019, 08:14 PM	#3
AshenBatmobile Drives: 2019 SS Join Date: Jan 2014 Location: San diego Posts: 57	Yes I have seen both bumpers. They are different from the front . However, if you look at the bottom part of it where the splitter is attached, it seems to follow a similar line. I think it looks pretty close. Look at the yellow line and below. I know above the line it's different. P.s. I hope it was ok to borrow these pictures. If not please let me know or delete post. Attached Images

02-16-2019, 05:53 AM	#4
EMTNLSS Drives: 2016 Hyper Blue 2SS Join Date: Feb 2016 Location: Layton, UT Posts: 498	The gen 2 splitter that's on the right in that picture works on the 16-18 so I would assume it would work in reverse. __________________ 2SS Hyper Blue Metallic \| A8 \| Jet Black Interior \| NPP Exhaust Current Mods: Catch Can \| aFe Lowering Springs \| GM 2nd Gen Splitter \| Hotchkis Sway Bars \| MRR FS02 Wheels \| Flowmaster Exhaust \| Dark Tail Lights \| Diode Dynamics Sidemarkers \| Roto Fab \| Solar TB \| PRAY Ported IM \| BMR \| PRAY Tune Upcoming Mods:

02-18-2019, 10:58 AM	#9
kropscamaro16 Drives: 2016 1ss camaro Join Date: Feb 2016 Location: 909 Posts: 9,815	somebody already did it it fits but ehhh not sold on it lol __________________ 16 1SS NIGHTFALL GRAY METALLIC WITH NPP #BECAUSERACECAR #SAVETHEMANUALS

02-28-2019, 06:49 AM	#14
Airfuel Drives: '19 2SS M6. Join Date: Aug 2018 Location: CT Posts: 340	Here is an oem version for ‘19 models. https://accessories.chevrolet.com/se...cts?sortId=top __________________ 2019 2SS, Shadow gray, 6mt, NPP, Magneride, Bose.

02-15-2019, 07:05 PM	#2
Tha_Infamous_E Drives: 2017 Camaro SS Join Date: Apr 2014 Location: California Posts: 177	Lol? Have you seen the entirely different bumper on the 19s or what?

02-16-2019, 08:51 PM	#6
chaospiece Drives: 2018 SS, 2016 GT Join Date: Mar 2018 Location: California Posts: 210	Well the 19 splitter fits the previous years. There's a thread on here about it, so they should all work.

02-17-2019, 02:27 AM	#8
chaospiece Drives: 2018 SS, 2016 GT Join Date: Mar 2018 Location: California Posts: 210	Here you go https://www.camaro6.com/forums/showthread.php?t=540728

02-25-2019, 09:43 AM	#10
bigwormgraphix Account Suspended Drives: 1991 Z28, 2015 SS & 2017 SS Join Date: Aug 2009 Location: Fort Worth, Tx Posts: 800	The C7 Carbon splitter will fit 2019 Camaros, we tested one last month. https://screamingchicken.com/2016-19...-zl1-splitter/

02-27-2019, 09:19 PM	#13
chaospiece Drives: 2018 SS, 2016 GT Join Date: Mar 2018 Location: California Posts: 210	Definitely depends on bumper mounting. Zl1 splitters wrap around the bottom to the front of the bumper.

User Name		Remember Me?
Password