[Fraxum]

Gen 6 Camaro 17" drag radial setup.

$900. For now local pickup only. South Jersey But I do not mind a drive to meet you.

Fits the LT1 and ZL1 (I have used them on my LT1 and ZL1.)

On the SS they fit but you may need to move the connector in the drivers side rear Wheelwell.

• about 30 runs on this setup
  
• TPMS
  
• 17x305 Mickey Thompson ET Street II DRs
  
• 17x11 DragStar Bracket racer wheels
  
• DS specific lugs, washers
  
• Hub Rings

[NOVAtwinLS3]

17’s will fit 2018 ZL1 rear brakes?

[Fraxum]

Originally Posted by NOVAtwinLS3

17’s will fit 2018 ZL1 rear brakes?

The ZL1 rear brakes are the same as the SS rear brakes. And I did make some runs on mt 2018 A10 ZL1.

THis DR setup works on all 3 V8 Camaro models.

mark

[L78toLT1]

Originally Posted by Fraxum

The ZL1 rear brakes are the same as the SS rear brakes. And I did make some runs on mt 2018 A10 ZL1.

THis DR setup works on all 3 V8 Camaro models.

mark

ZL1 rear rotors are larger. Std SS and SS1LE rears are the same

[Fraxum]

Originally Posted by L78toLT1

ZL1 rear rotors are larger. Std SS and SS1LE rears are the same

Oh I see larger rotors. I was thinking calipers. I was not aware of that. But I first used this setup on my 2018 A10 ZL1. So they do fit there also.

I am not sure about the ZL1LE but who wants to drag race that Camaro?

[MVPxD]

PM'ed

[Fraxum]

Originally Posted by MVPxD

PM'ed

Replied.