Homepage Garage Wiki Register Social Groups Calendar Search Today's Posts Mark Forums Read
#Camaro6
Go Back   CAMARO6 > Engine | Drivetrain | Powertrain Technical Discussions > Tuning / Diagnostics


Phastek Performance


Post Reply
 
Thread Tools
Old 03-08-2021, 10:39 PM   #1
BDPhoto519
 
BDPhoto519's Avatar
 
Drives: 2018 Camaro 2SS A8
Join Date: Dec 2019
Location: Windsor, Ontario, Canada
Posts: 90
Tune Changes required when adding Holley Hi-Ram & Katech 103mm TB

I recently picked up a 105mm Holley Hi-Ram & Katech 103mm TB to round out my FBO setup on my 2018 Camaro SS.

Aside from some retouching on the MAF curve and VVE tables is there anything else I will need to tune with the new setup?

I have read a few posts about TB area scaling and manifold volume change in the tune, and they all seem to eventually lead to people trying various values, and others saying to just leave it alone as it has no effect?

Does anyone have any direct experience or advice with this pretty common setup?

Thanks!
__________________
2018 Camaro 2SS A8 Redline Edition
BDPhoto519 is offline   Reply With Quote
Post Reply

Tags
103mm, holley hi-ram, intake, katech, tune

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:38 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.