TPW 2-11-2013 - Page 45 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

hharris · 03-21-2013, 03:44 PM

heres some pics. and results of my day.....

Ive had to run a lot of errands today dropping off and picking up cars. so ive got 150 miles of seat time today

I pulled the exhaust fuse yesterday at the dealer when the salesman was talking with another customer.

it sounds amazing. the NPP is the only way to fly!

Ive was trying to keep my foot out of it this morning and got 22.2 mpg on the interstate with cruise control on 70.0

in the city, if I baby it its reading 17mpgs.

one of my detailers rode with me this afternoon so I gave it hell a few times 1st - 3rd it really pulls hard over 4k rpms. cant do much when its only 40 degrees

I kicked in the stability trac system pretty good when taking a on ramp cloverleaf at 65. it felt like it was on rails until I pushed just a little bit more and the ass end started to kick out, I forgot the stabil trac was on so just as I gave it more throttle to control the slide the nanny kicked in and said NO NO NO!

its a fun car and gets tons of looks. be patient because its gonna be a long time before you can wipe the grins of your faces too.

Combover · 03-21-2013, 05:04 PM

Lookin' good !

Irishblackcoffee · 03-21-2013, 06:04 PM

Quote:

Originally Posted by hharris

heres some pics. and results of my day.....

Ive had to run a lot of errands today dropping off and picking up cars. so ive got 150 miles of seat time today

I pulled the exhaust fuse yesterday at the dealer when the salesman was talking with another customer.

it sounds amazing. the NPP is the only way to fly!

Ive was trying to keep my foot out of it this morning and got 22.2 mpg on the interstate with cruise control on 70.0

in the city, if I baby it its reading 17mpgs.

one of my detailers rode with me this afternoon so I gave it hell a few times 1st - 3rd it really pulls hard over 4k rpms. cant do much when its only 40 degrees

I kicked in the stability trac system pretty good when taking a on ramp cloverleaf at 65. it felt like it was on rails until I pushed just a little bit more and the ass end started to kick out, I forgot the stabil trac was on so just as I gave it more throttle to control the slide the nanny kicked in and said NO NO NO!

its a fun car and gets tons of looks. be patient because its gonna be a long time before you can wipe the grins of your faces too.

Have a question for you, where did you get your 1LE hood emblems and the one in your engine compartment. Thanks

Gef0rc3 · 03-21-2013, 06:55 PM

Can't wait to pic mine up on Saturday !!!!! 2 days left !!!!!

hharris · 03-21-2013, 11:05 PM

Quote:

Originally Posted by Gef0rc3

How do u like the jac fab bracket I have one too but still waiting for Saturday to come

It's awesome, it installs in seconds! Be sure to follow simple instructions of not crossthreading the two installation bolts and you'll be good to go.

It's refreshing when the product ends up being high quality that they advertise. Thumbs up to jac-fab

you'll be happy with it

hharris · 03-21-2013, 11:10 PM

Quote:

Originally Posted by Irishblackcoffee

Have a question for you, where did you get your 1LE hood emblems and the one in your engine compartment. Thanks

Rodger at Emblem pros

Excellent product and service. I also have the 1LE emblems for the trunk and grille that I'll be installing this weekend. The hood and trunk are stainless the strut brace emblems are plastic and great quality. I highly recommend them and they can make just bout anything you request...

Gef0rc3 · 03-21-2013, 11:57 PM

Quote:

Originally Posted by hharris

It's awesome, it installs in seconds! Be sure to follow simple instructions of not crossthreading the two installation bolts and you'll be good to go.

It's refreshing when the product ends up being high quality that they advertise. Thumbs up to jac-fab

you'll be happy with it

Yea the bracket came in and I was surprised how sturdy it is. I'm just glad I can finally take the dust off it... I wonder what else jac-fab makes...

Irishblackcoffee · 03-22-2013, 08:46 AM

Quote:

Originally Posted by hharris

Rodger at Emblem pros

Excellent product and service. I also have the 1LE emblems for the trunk and grille that I'll be installing this weekend. The hood and trunk are stainless the strut brace emblems are plastic and great quality. I highly recommend them and they can make just bout anything you request...

Can you send me a link to their site. Thanks and yes they do look really good.

WongBob · 03-22-2013, 09:29 AM

They dont have the 1LE emblems on the site that I could find or search for.

hharris · 03-22-2013, 10:21 AM

you have to call them and talk to Rodger. he makes them special order

Irishblackcoffee · 03-22-2013, 10:45 AM

Quote:

Originally Posted by hharris

you have to call them and talk to Rodger. he makes them special order

You have the phone number? I want to get a set for my car. Thanks

GearheadSS · 03-22-2013, 10:56 AM

It is absolutely insane that there are cars built after 2/11 that have already been shipped and delivered. Just saw that a 2/25 build date 1LE was delivered in Michigan.

hharris · 03-22-2013, 01:35 PM

email sales@eblempros.com
phone 859-455-9326

Irishblackcoffee · 03-22-2013, 02:12 PM

Quote:

Originally Posted by GearheadSS

It is absolutely insane that there are cars built after 2/11 that have already been shipped and delivered. Just saw that a 2/25 build date 1LE was delivered in Michigan.

Yea I know. Mine was built on 2/6 and im still waiting. Wife and I are just sitting and waiting. Wish it would get here.

03-21-2013, 03:44 PM	#617
hharris Drives: 2013 1LE Join Date: Jan 2013 Location: Arnold MO Posts: 107	heres some pics. and results of my day..... Ive had to run a lot of errands today dropping off and picking up cars. so ive got 150 miles of seat time today I pulled the exhaust fuse yesterday at the dealer when the salesman was talking with another customer. it sounds amazing. the NPP is the only way to fly! Ive was trying to keep my foot out of it this morning and got 22.2 mpg on the interstate with cruise control on 70.0 in the city, if I baby it its reading 17mpgs. one of my detailers rode with me this afternoon so I gave it hell a few times 1st - 3rd it really pulls hard over 4k rpms. cant do much when its only 40 degrees I kicked in the stability trac system pretty good when taking a on ramp cloverleaf at 65. it felt like it was on rails until I pushed just a little bit more and the ass end started to kick out, I forgot the stabil trac was on so just as I gave it more throttle to control the slide the nanny kicked in and said NO NO NO! its a fun car and gets tons of looks. be patient because its gonna be a long time before you can wipe the grins of your faces too. Attached Images

03-22-2013, 09:29 AM	#625
WongBob Dig Race? Drives: '13 AGM 2SS/RS 1LE Join Date: Dec 2009 Location: Minden, LA Posts: 316	They dont have the 1LE emblems on the site that I could find or search for. __________________ TBSS Cam Only Record Holder 1.467 60', 11.568 @ 116.86

03-21-2013, 05:04 PM	#618
Combover Drives: 2013 ZL1 Join Date: Nov 2012 Location: Georgia Posts: 493	Lookin' good !

03-21-2013, 06:55 PM	#620
Gef0rc3 Drives: 2013 1SS 1LE IOM Join Date: Jan 2013 Location: Montgomery Posts: 321	Can't wait to pic mine up on Saturday !!!!! 2 days left !!!!!

03-22-2013, 10:21 AM	#626
hharris Drives: 2013 1LE Join Date: Jan 2013 Location: Arnold MO Posts: 107	you have to call them and talk to Rodger. he makes them special order

03-22-2013, 10:56 AM	#628
GearheadSS Drives: 23 LT1/22 Colorado TB/69 Chevelle Join Date: Jun 2006 Location: Greenville, Tx Posts: 4,969 View My Garage	It is absolutely insane that there are cars built after 2/11 that have already been shipped and delivered. Just saw that a 2/25 build date 1LE was delivered in Michigan.

03-22-2013, 01:35 PM	#629
hharris Drives: 2013 1LE Join Date: Jan 2013 Location: Arnold MO Posts: 107	email sales@eblempros.com phone 859-455-9326