05-25-2018, 06:08 AM | #1 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
102 TB intake tube
So I'm switching from the 90mm TB to a 102 Nick Williams. Not sure how I'm going to stretch the 90mm elbow for my Maggie over the 102mm opening. I didn't see anything on Katechs website for this. What have others done in this situation?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
05-25-2018, 08:33 AM | #2 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Interested as well. Same situation here for my Whipple. My stock TB is my bottleneck but haven't seen any out the box options for my Roto-Fab. Hoping I don't have to get one fabricated.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
05-25-2018, 08:36 AM | #3 |
Drives: 2016 Camaro SS Join Date: Jul 2016
Location: Korea
Posts: 417
|
Katechs said 92mm elbow will be streched and fit on 103mm TB..surprisingly. Not sure, but I will try next week.
|
05-25-2018, 08:45 AM | #4 |
Drives: Camaro 17 SS Join Date: Jan 2017
Location: Florida
Posts: 623
|
Stretching it will work. That is what I had to do. Use a small polymer interior tool and roll it onto the throttle body.
|
05-25-2018, 03:51 PM | #5 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
I'm going to try the stretching thingy, but also looking on ebay for a 4" 90 degree silicone elbow. They are about 12 to 15 bucks. I'll try this weekend to stretch it first since I have two stock elbow to work with. I post my results.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
05-25-2018, 03:54 PM | #6 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Hoping to re-use mine so I don't have to worry about my maf and meth
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
05-25-2018, 04:24 PM | #7 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Joe, did you end up with AEM or Alky Control?
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
05-25-2018, 04:27 PM | #8 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Alky and a single nozzle right now.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
05-25-2018, 06:06 PM | #9 |
Drives: 2017 Camaro 2SS Nightfall Gray vert Join Date: Jan 2018
Location: Swansea, IL
Posts: 1,219
|
Here are the pictures from Laynlo’s setup:
__________________
2017 Camaro 2SS vert - Nightfall Gray
Magnuson Heartbeat SC - Tuned by JRE Racing 776whp/745wtq (12psi) 2018 Corvette Z06 vert- Black To be tuned by JRE Racing TBD performance |
05-25-2018, 06:11 PM | #10 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Just like my first girlfriend said, hell yes it will fit.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
05-25-2018, 06:13 PM | #11 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
Lol. Nice
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
05-25-2018, 06:29 PM | #12 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
She knew what she was doing. Ha
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
05-28-2018, 02:02 PM | #13 |
Drives: Black 2017 Camaro SS 1LE Join Date: Dec 2016
Location: Virginia Beach
Posts: 1,319
|
When you do it please let me know if you had to buy a TB adapter plate from Whipple for it. I've heard you had to from Whipple and then Katech said they didn't need one when they installed two of them.
__________________
2017 1LE SS Black - Mods - Forged - lowered compression - BTR custom Cam - Whipple, 3.500 upper and 8.0 lower pulley, Roto-Fab, 1 7/8 Kooks headers, off road pipes, & 3" Kooks full exhaust. LT4 fuel system, with Alky single nozzle running 100% meth. (not installed yet) DSX Tuning flex fuel and DSX tuning Aux pump
|
05-28-2018, 03:31 PM | #14 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Mine came from Magnuson, its ported to fit the NW TB. Its done and I've fired it up and waiting for my new tune from Mike at Magnuson. I'll drive it tomorrow night after I load the tune on my HP tuners.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
|
Post Reply
|
|
|