[Chay]

Guys need your suggestions

1. Did anyone install front cam on their car ? I want to install 360 degrees cam or front cam
2. which fuel is better to use ? unleaded /unleaded plus or premium?
3. Anyone who is from Arkansas or Missouri? I want to know if anyone know places who can install ground effects or rear diffuser /dash cam /protective film

[Chazzz]

Originally Posted by Chay

Didn't realize that there inst problem with All season tires, Have already ordered from Zl1addons for Deluxe guards

Few people suggested me to get the 3M or Xpel clear protective film, What did you do with yours?

I elected to go without protection and keep the money for my next Camaro as it adds no value other than peace of mind. I instead invested 12 bucks in a bottle of code GD1 Hyper Blue touch up paint. Chips are going to happen, especially if you do a lot of highway driving but if you are cautious you can keep them to a minimum. I've learned to try my best to avoid door dings chips and scratches, but it's a car and you will never keep it perfect. Someone or something is bound to mess it up sooner or later, so don't sweat the small stuff and enjoy ! As for the fuel anything other than 87 octane is money down the toilet with the V6.

[Zack46]

Congrats. Welcome to the club..Car looks great. Love the hyper blue

[dfwcowboy]

Originally Posted by Chazzz

I doubt you will need rock guards on an LT. The V8 cars with the wide summer rear tires sling rocks and lots of them ! This is an issue you shouldn't have with the non staggered all season tires on the LT. If your concern is protecting your new car from paint chips, by all means concentrate your protection on the front facia and hood and do it ASAP !

I never got the rock guards on my 5th gen LT and had quite a bit of pitting on my rockers and rear quarter panel. Lesson learned was Xpel and rock guards. I'm sure wider tires are worse.

[Chay]

Below is the list of stuff i bought and their respective costs

Uniden Radar R3:

https://www.ebay.com/itm/Uniden-R3-E....Xuniden+.TRS0

$399.99

Mount for Radar:
https://www.ebay.com/itm/R1-R3-Car-M...72.m2749.l2649

27$

Harness:

https://www.gen5diy.com/collections/...tector-harness

Discount Code: Lethal10 for getting 10 percent discount

49.95$

Rock Guards:

Cost : 80$
Discount code: lethal5

https://zl1addons.com/collections/ca...nt=30384124865

87.50$

BowTie Decal:

https://www.ebay.com/itm/2016-2017-2...itleDesc=0%7C0

$16.99


Smoked side Markers:

https://www.phastekperformance.com/D...arker-1215.htm
Code : Lethal5


Black Taillamps Tint:

https://www.phastekperformance.com/2...rn-reverse.htm

Both 63.15$

LED Side Markers:(STOCK NOT AVAILABLE- BACK ORDERS)

https://www.phastekperformance.com/2...o-6-dd5063.htm
Code : Lethal5


Floor Mats:

https://www.amazon.com/3D-MAXpider-C...oor+mat+camaro

126.16$

https://www.weathertech.com/chevrole...dystyle/coupe/
or
https://www.carid.com/weathertech/ca...mpn-40857.html

109$

Dash Cam Memory card:

https://www.amazon.com/Lexar-High-Pe..._title_ce?th=1


128gb - 45.68$

Dash Cam:

www.blackboxmycar.com

Get 15$ off using code RP Production

BlackVue DR590W-2CH WiFi Dash Cam
$259.98

[Chay]

Suggestions on Front splitter RPI designs SS replica RS splitter vs ACS composite 48-4-007? I dont want drill any holes i want the perfect fitting model

[Chay]

Got PPF done with Xpel. Should have got it done in the first week of buying the car. I already got one rock chip near the front part of rear wheel.

Front Bumper + Hood + Rocker Panels + Mirrors+ Hallow space behind Door Handles + edges of the doors + Small area behind rear wheels = $1500

Also got little bit of paint correction and CQuartz 3.0 Ceramic coat


> Black Bowtie
> Tinted Side markers
> ZL1 Addons Rock Guards
> Tinted Third break lights
> light dark tinted tail lights
> Uniden R3 Radar with Gen5Diy hardwired with rear mirror mount

[Zack46]

CAR is sick looking!

Well done.

[Chay]

Any suggestions on GM cold air intake ?

[Chay]

Got my ZL1 Addons rear diffuser and installed it. They have provided 2 bolts to drill and bolt them but would have been better if they provided another 2 long screws for replacement of OEM short screws that are already on the bumper

[Chay]

Finally installed my Front replica splitter after wrapping it with Satin black Vinyl

[Chay]

Came home to this Beauty waiting at my door step. Any suggestions on installation? Is the installation easy? Can i do on my own or do you guys recommend to get it done by Mechanic.
Couldnt find a clear video of installing this on Camaro gen 6

[Chay]

Done installing K&N cold air intake