01-15-2021, 01:49 PM | #1 |
Drives: not enough room Join Date: Jan 2021
Location: oklqhoma
Posts: 3
|
needing fueling advice.
I've been piecing things together, so far I've gotten a jokerz full tilt with 2.3 ,a 9.17 lower, 2inch tsp headers, low side fuel kit, and heat exchanger upgrade. Not looking to do heads and cam at the moment if possible. Just seeing if im overlooking anything.
|
01-15-2021, 02:14 PM | #2 |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
103 throttle body and Rotofab Big Gulp.
Unless you are going to use methanol, a 2.3 and 9.17 is a lot of pulley and will spin the blower too much making more heat. I would either do 2.3 upper with stock Lower or stock size upper with 9.17 lower. |
01-15-2021, 02:39 PM | #3 |
Drives: not enough room Join Date: Jan 2021
Location: oklqhoma
Posts: 3
|
Yes, forgot the 103. That's been my concern with that lower. But without the lower am I sacrificing much?
|
01-15-2021, 10:31 PM | #4 | |
Drives: 18 ZL1 nightfall grey A10 Join Date: Apr 2018
Location: RGV Texas
Posts: 1,527
|
Quote:
I have cam, headers, meth, 103 TB, Big Gulp, 2.3 upper, and 9.17 lower. I’m planning and scaling back to 2.5 upper and removing the meth. |
|
01-18-2021, 08:28 PM | #5 |
Drives: not enough room Join Date: Jan 2021
Location: oklqhoma
Posts: 3
|
After thinking about it, I think for now I will do the put the ported blower with the 2.3 on 103tb, big gulp, Headers, HX, and tune.
|
|
|
Post Reply
|
|
|