11-07-2023, 05:57 PM | #1 |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 277
|
Toohigh PSI veterans
For those that have already done the thpsi install do you happen to recall the different hose lengths you needed? Looking at the pictures from those that hev done the install there seems to be the need for 4 hoses. I have all the fittings and hoses in hand so it would be good to get that part out the way while I wait for the kit to come in.
Getting excited is an understatement.
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
|
11-07-2023, 06:43 PM | #2 |
Drives: Chevy Camaro Join Date: Sep 2022
Location: IN
Posts: 193
|
Are you referring to the fuel line that's needed? I bought the evil energy 6an ptfe fuel line kit off amazon, 16' for around $84.
__________________
'20 Camaro LT1
Twin 67/62 turbo 401(L8t) Texas speed forged piston & rod, BTR stg1 turbo cam, holley ultra lo, port injection, circle d 3600 stall, hoosier bias ply quick time pro's on racestar recluse wheels 1.45 4.01 6.07@120.74 9.28@153.43 '94 Camaro Z28 6mt cc306 cam, 4:10's, longtubes with x pipe, getting an engine rebuild |
11-07-2023, 08:05 PM | #3 |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 277
|
Yea I have everything needed to make the lines just the measurements for length of each. Looking at all the pictures they all seem to be the same length so I was wondering if anyone recorded that information so I can knock the lines out while I wait for the kit.
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
|
11-08-2023, 07:23 AM | #4 |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Here is a good picture of my setup on the Camaro. I'm assuming you got hold of Mike to talk to him, I told him you'd be calling.
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
11-08-2023, 08:41 AM | #5 | |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 277
|
Quote:
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
|
|
11-08-2023, 08:49 AM | #6 |
Drives: Chevy Camaro Join Date: Sep 2022
Location: IN
Posts: 193
|
What intake manifold are you using or are you using plates? That will change the length of the lines. I didn't measure and record that information while I was doing mine. I understand you're excited and trying to be a step ahead for when everything shows up but it doesn't take all that long to make and plumb the lines when you have everything in place.
__________________
'20 Camaro LT1
Twin 67/62 turbo 401(L8t) Texas speed forged piston & rod, BTR stg1 turbo cam, holley ultra lo, port injection, circle d 3600 stall, hoosier bias ply quick time pro's on racestar recluse wheels 1.45 4.01 6.07@120.74 9.28@153.43 '94 Camaro Z28 6mt cc306 cam, 4:10's, longtubes with x pipe, getting an engine rebuild |
11-08-2023, 09:06 AM | #7 | |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 277
|
Quote:
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
|
|
11-08-2023, 12:03 PM | #8 |
Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 929
|
I'd probably wait until you have everything in front of you before trying to make the fuel lines.
The fittings aren't really reusable once you've tightened them down on the fuel line. Sure you can probably "get away with it" if you make one wrong, but fuel's no joke... and those things are expensive if you make one or more of them a little too short or long. So if it were me, I wouldn't pre-assemble anything. Even as little as a 1/2" off in length can be a big problem. I didn't record the lengths on mine or I'd give them to you, and given that a minor variance can be a problem, i doubt I'd be able to get you completely accurate lengths if i went out and tried to use a tapemeasure or something.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
11-08-2023, 12:22 PM | #9 | |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Quote:
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
11-08-2023, 05:00 PM | #10 | |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 277
|
Quote:
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
Last edited by WiggyB; 11-08-2023 at 06:42 PM. |
|
11-08-2023, 05:47 PM | #11 | |
Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 929
|
Quote:
The other end of the fitting can be installed and removed onto another connection many times without issue.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
|
11-08-2023, 05:50 PM | #12 |
Drives: 2017 Camaro SS 50th Anniversary Join Date: Apr 2021
Location: Missouri
Posts: 929
|
Good luck on the install! The power gains were significant. Never was able to make it to the track with the new config. Maybe in the spring now.
__________________
2017 50th Anniversary Edition | P1X Stage 2
DSX Aux Low Side | LT4 high side | Flex Fuel TooHighPsi Port Injection (installed & tuning) CircleD 3K Stall | QA1 CF Driveshaft Forgestar F14 Drag 17x10 NT555R2 305/45/17 Rear Forgestar F14 18x8 NT555G2 235/50/18 Front 10.84@131 w/4.13" pulley ??.??@??? w/3.7" pulley (installed & tuning) |
11-10-2023, 06:51 AM | #13 | |
Drives: 2022 Lt1 A10 Join Date: Nov 2015
Location: clark, mo
Posts: 8,860
|
Quote:
__________________
2022 Lt1 6.2 A10, Maggie 2300, THPSI Port Inj/10 rib, Rotofab, E, Nickey, SCOL, Griptech, RC Bandits, Hoosiers/MT 9.80@142.96 1.44 60ft, 6.34@112 707/669 RWHP/TRQ. 16SS Maggie 2650 9.41@147 1.35 60ft, 5.99@119. 16 C7 A8 10.90@128 Bolt on stuff
|
|
11-18-2023, 07:32 PM | #14 |
Drives: 2022 Camaro 2SS 1LE Join Date: Nov 2021
Location: NC
Posts: 277
|
Well got my shipping information so patiently waiting. Got the JMS bap hooked up today so I'm ready for the rest of the work.
__________________
p1sc1 factory box w/ stage 2 intercooler, Lt4 fueling, JMS BAP, lt2 intake, kooks 1/78 longtube headers w/ h/f cats, alky meth kit, thpsi port injection
|
|
|
Post Reply
|
|
|