02-15-2019, 08:24 PM | #1 |
Drives: 2016 Summit White Camaro 2SS M6 Join Date: Aug 2018
Location: Florida
Posts: 6
|
Thatonehoonigan 2SS Build
Current Mods
-3dEngineering Wicker Bill -Verde Wheels -ZL1ADDONS Lift Pads -Phastek RST PX1 Lowering Springs -JLT Catch Can -RotoFab Dry CAI -1 7/8” Stainless Works Headers -Full Stainless Works NPP Exhaust w/ Off road cats -Tuned by Pray Performance Future Mods -Better wheels and tires -FlexFuel Kit -Line Lock Kit -Ported Throttle Body -Ported Intake Manifold Last edited by thatonehoonigan; 06-04-2019 at 10:04 AM. Reason: Updating mod list |
02-15-2019, 08:57 PM | #2 |
2016 loaded 2SS
Drives: Maverick X3 Turbo R Join Date: Feb 2015
Location: United States
Posts: 242
|
some straight up TIG Porn lol
you know you a real hot-rodder when race car parts are in the house you planning on a power-adder?
__________________
|
02-15-2019, 09:07 PM | #3 | |
Drives: 2016 Summit White Camaro 2SS M6 Join Date: Aug 2018
Location: Florida
Posts: 6
|
Quote:
What do you mean by Power Adder? |
|
02-18-2019, 10:21 PM | #4 |
Drives: 2017 Camaro SS Join Date: Mar 2016
Location: Saint Louis
Posts: 346
|
Power adder=supercharger, turbo, or nitrous
__________________
2017 SS manual ordered through the one and only Becky!
For sale: https://www.camaro6.com/forums/showthread.php?t=612154 |
02-19-2019, 01:39 PM | #5 |
Drives: 2016 Summit White Camaro 2SS M6 Join Date: Aug 2018
Location: Florida
Posts: 6
|
|
02-19-2019, 01:42 PM | #6 |
Drives: 2016 Summit White Camaro 2SS M6 Join Date: Aug 2018
Location: Florida
Posts: 6
|
And for anyone who is curious I was able to get the Stainless Works Headers in without taking out the motor mount or starter, all I did was take out the Starter Heat Shield and had my wife help guide the Long Tubes down from the top and it fit right in place. And I was able to get the dipstick in even easier by marking where it was with a marker before pulling it out which made guiding it into place extremely easy. Took me about 20 minutes to get the passenger side in place, bolted down, and the dipstick in.
|
06-04-2019, 10:01 AM | #7 |
Drives: 2016 Summit White Camaro 2SS M6 Join Date: Aug 2018
Location: Florida
Posts: 6
|
Installed a wicker bill from 3dEngineering, install went fairly well although the instructions were absolutely awful. I like the look of it and I like that it installs on the stock SS spoiler. You have to drill several holes into the stock spoiler and if you follow the instructions that are provided you'll drill holes that are too large to fit the rivet nuts, I would've drilled a hole too large had I not been paranoid about it and checking several times before I drilled any holes. My only complaint is that when you wash the car water will seep into the small crack between the 2 separate pieces and if you don't use a good spot free rinse, blow out every drop with an air compressor, or take apart the separate pieces you will get water spots that really take away from the look.
|
06-27-2019, 03:31 PM | #8 |
Drives: 2016 Summit White Camaro 2SS M6 Join Date: Aug 2018
Location: Florida
Posts: 6
|
Couple more pictures of the 3DE Wicker Bill, the laser etching is really nice, you can also really see they water spots in the crack between the clear and black pieces.
|
|
|
Post Reply
|
|
|