[Megahurtz]

Originally Posted by Haole

It took me about 5 min to slice the orange things off with my Leatherman. So about the same time it would have taken to go get my hammer. I did it still in less than 45 min or so.
I do like these more than the stock lights. I thank everyone on this DIY section as well as all the others for the help and knowledge spread on here
Being in Hawaii there aren't really alot of get togethers so I spend my time admiring everyone's camaro's on this forum

All you needed to do was pull the light towards you.

[jpsuperman81]

So I don't know if anyone else had this problem but the tree clips the one on each side inside the trunk, I used a finishing tool and pull and twisted on that sucker for 10 mins and couldn't even break it to get it out, just kept bending and giving but wouldn't pop out or break off, I got annoyed and quit only thing I know to do is reach behind and cut it, has anyone else had similar problem with these two clips? The other 3 pop clips were super easy no issues.

[Sledgehammer70]

Originally Posted by jpsuperman81

So I don't know if anyone else had this problem but the tree clips the one on each side inside the trunk, I used a finishing tool and pull and twisted on that sucker for 10 mins and couldn't even break it to get it out, just kept bending and giving but wouldn't pop out or break off, I got annoyed and quit only thing I know to do is reach behind and cut it, has anyone else had similar problem with these two clips? The other 3 pop clips were super easy no issues.

I have sheered off 3 of them. they are cheap crappy clips.

[jpsuperman81]

Yeh I would of cut it and kept going but wasn't prepared to have to do that, I'll take something with me next time.

[AmericanMike]

Originally Posted by jpsuperman81

So I don't know if anyone else had this problem but the tree clips the one on each side inside the trunk, I used a finishing tool and pull and twisted on that sucker for 10 mins and couldn't even break it to get it out, just kept bending and giving but wouldn't pop out or break off, I got annoyed and quit only thing I know to do is reach behind and cut it, has anyone else had similar problem with these two clips? The other 3 pop clips were super easy no issues.

I bought 100 of these for like $4. The expensive part for me was when removing the light I gouged the bumper cover.

I love comprehensive insurance coverage with no deductible!! My wife says I'm crazy fix it as its hardly noticeable (about 1/2 inch long) however its driving me crazy.

[Kiwibee]

Originally Posted by Sledgehammer70

The install on these new lights is fairly easy, these are the GM DOT approved lights and can be purchased at your dealer or certified GM reseller. In my case, I purchased mine at Phastek Performance.



Details on these lights: http://bit.ly/6thGenDarkTaillights

Thank you, your video was very helpful!😊

Here are mine installed:

[FLYNNZL1]

Originally Posted by AmericanMike

I bought 100 of these for like $4. The expensive part for me was when removing the light I gouged the bumper cover.

I love comprehensive insurance coverage with no deductible!! My wife says I'm crazy fix it as its hardly noticeable (about 1/2 inch long) however its driving me crazy.

Do you have a link were you bought the Christmas Tree Push Rivets?

[Michigan1LTRS]

Google or amazon gm tree pins or push pins