[beworthy3]

Replacing the front splitter on my 1LE as I broke it last year at autocross. I know there is an adhesive on there now. But will adding a new adhesive be necessary for the new splitter. It is an ACS composite splitter.

[timesublime]

Yes.

[Chutzpah]

Originally Posted by timesublime

Yes.

Glad you shared this video. I was thinking about adding a splitter (although somewhat against my better judgement, curbs etc). That kinda looks like a PIA to install, assuming it’s the same set up for the LT1. I think I’m leaving well enough alone.

[ember1205]

Originally Posted by Chutzpah

Glad you shared this video. I was thinking about adding a splitter (although somewhat against my better judgement, curbs etc). That kinda looks like a PIA to install, assuming it’s the same set up for the LT1. I think I’m leaving well enough alone.

Totally depends on the specific product... I have an EOS splitter on my car (giant PITA to figure out which ones would and would not fit correctly because their marketing info for them is terrible) that actually went on fairly easily. You do need the adhesive, and you have to ensure you prep the car correctly for the install to "take" correctly.

https://youtu.be/KSjxI-sTl2A

[ctrlz]

I used push rivets to install mine, as per GlenE's suggestion:
https://www.camaro6.com/forums/showt...=434909&page=2

[beworthy3]

Thanks all

[sr71bb]

Originally Posted by beworthy3

Replacing the front splitter on my 1LE as I broke it last year at autocross. I know there is an adhesive on there now. But will adding a new adhesive be necessary for the new splitter. It is an ACS composite splitter.

I always use rivets in addition to the bolts. I dont use adhesive.

[beworthy3]

Originally Posted by sr71bb

I always use rivets in addition to the bolts. I dont use adhesive.

I think this is what im going to end up doing