08-03-2018, 09:56 AM | #197 | ||
Drives: 2016 Camaro 2SS Join Date: Dec 2015
Location: Philadelphia
Posts: 771
|
Quote:
Quote:
I see... stone looks all right, but I really like how smooth that frozen polished finish looks. I guess the cast metal is too porous and/or uneven to actually look like that :(
__________________
|
||
08-03-2018, 10:05 AM | #198 |
Drives: Turbo 4, SC V8 and Twin Turbo V8 Join Date: Jan 2014
Location: Vista, CA
Posts: 1,338
|
Bingo. We've tested it a few times and it never comes out looking perfect, so because of that we don't offer it. If it's not up to HRE standards which are really strict, then we just don't offer it.
|
08-03-2018, 10:33 AM | #199 |
Drives: 2017 Chevrolet SS 1LE Join Date: Oct 2016
Location: Los Angeles, California
Posts: 9,270
|
HRE standards are strict trust me.
I didn’t shave once and walked in there the inspector rejected my quality and sent me back to shave. LOL All jokes aside their polished frozen is amazing. By their stone has some serious attitude as well. |
08-03-2018, 02:33 PM | #200 | |
Drives: Turbo 4, SC V8 and Twin Turbo V8 Join Date: Jan 2014
Location: Vista, CA
Posts: 1,338
|
Keeping it Classy with Lethal Camaro. With about 747hp and 614 ft-lb of torque, this 2016 Chevrolet Camaro 2SS has made a name for itself: Lethal Camaro. In addition to the massive power output, this Camaro now has a set of FF04 FlowForm wheels in IPA to top it off! 20" FF04's in our IPA finish for your viewing pleasure. Last edited by FlowForm_Wheels; 08-03-2018 at 04:24 PM. |
|
08-06-2018, 09:25 PM | #201 |
Drives: Bmw f80 m3 Join Date: Jul 2018
Location: Orange county
Posts: 11
|
What are the specs on the HRE shown above ? They fit perfect !
|
08-07-2018, 10:06 AM | #202 |
Drives: Turbo 4, SC V8 and Twin Turbo V8 Join Date: Jan 2014
Location: Vista, CA
Posts: 1,338
|
|
08-17-2018, 11:57 AM | #203 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
Flow Forged FS06/ Custom Red Finish
We got a chance to work with one of our long time customers on a new set and I have to say his choice and view worked out perfectly/.
The new FS06 Flow forged construction sits perfect on this lowered Camaro with a full transparent red finish to go along the red details on the vehicle. Below are the specs: Brand: MRR Wheels Wheels: FS06 Construction: Light weight Flow forged Specs: Camaro specific custom specs/ 66.9 bores/ 5x120 pcd / 23et/43et Color: Transparent Red |
08-17-2018, 11:59 AM | #204 |
Drives: Turbo 4, SC V8 and Twin Turbo V8 Join Date: Jan 2014
Location: Vista, CA
Posts: 1,338
|
We followed a set of HRE RS309 Wheels in production and took some photos during the process. * Rim parts are pulled, forgings are lathed, and everything is placed onto a cart so we can keep track of their progress. What you see below is so we can limit how much mass the wheel has. *More pockets, less weight! * Center Forgings jump onto our Horizontal mills to get their design cut Now we start the process of de-burring the wheel, smoothing it out and then getting that into our polisher! Onto Polishing! Nice and shiny!! After we clean up the centers after their polishing, we bring them over to powdercoat Out from powder! *First stage of powdercoat is shot, second stage will be the Satin Clear Coat to turn this into our Frozen Polished Bronze finish Second stage of powder is applied and now you can see they're Satin in this photo Assembly starting. *First things first, remove the cover on the backpad. *Backpads should never be powdercoated as that alters the offset which was machined. * Fasteners going in! *We're in the home stretch! Blue tape on the lip to protect it from scratches. And that's it! *We have a complete set of HRE RS309's! *Once it's all said and done, the Polished Bronze outer and that Frozen Polished Bronze center really work for each other. *We want to know what you think! *Here's the completed wheel! Thanks for taking a look! *What do you think of the RS309? *You like our color combo choice? |
08-23-2018, 10:36 AM | #205 |
USN CPO
Drives: 2021 Camaro ZL1, 2017 Camaro 2SS Join Date: Feb 2017
Location: Fort Worth Texas
Posts: 156
|
These are MRR 017s in Polished Powder Coat, 20x10 with 275/35 front and 20x11 with 305/35 rear. All from Paul at PkAuto Design. Took most of these pictures 17 Aug 2018.
|
08-23-2018, 01:12 PM | #206 |
Drives: camaro Join Date: Nov 2011
Location: los angeles ca
Posts: 404
|
|
08-23-2018, 02:55 PM | #207 |
Drives: 2016 Camaro 2SS Join Date: Aug 2018
Location: Florida
Posts: 6
|
Recently got my Forgestar F14's in gunmetal from Paul at PK. He was extremely helpful in helping me figure out what fitment I needed. 20x9.5 deep 285/30 front and 20x11 super deep 305/30 rear. On BMR springs with no rub or fitment issues.
|
08-23-2018, 09:38 PM | #208 |
IG @arod221_L5P
Drives: 2024 GMC 2500HD AT4 Join Date: Aug 2012
Location: Dripping Springs, TX
Posts: 373
|
a few pics on my new daily wheels......another 6th gen on FF04's. It works though.
__________________
My Build Threads
2013 AGM 2SS/RS ***SOLD*** http://www.camaro5.com/forums/showthread.php?t=374535 2017 NGM ZL1 ***SOLD*** https://www.camaro6.com/forums/showthread.php?t=548637 ***COMING SOON*** 2024 RBM ZL1 (hopefully) |
08-24-2018, 10:48 AM | #209 |
Drives: Turbo 4, SC V8 and Twin Turbo V8 Join Date: Jan 2014
Location: Vista, CA
Posts: 1,338
|
|
08-31-2018, 07:46 PM | #210 |
Drives: 2017 2SS A8 Black Join Date: Mar 2017
Location: NC
Posts: 250
|
Stance SF07 Double Brushed Gunmetal
Nitto 555 285/30 20x10 et 23 305/30 20x10.5 et35
BIG thanks to Paul @ PK Auto Not lowered yet.....BMR springs next weekend.
__________________
Man is born free, and everywhere he is in chains
|
|
|
Post Reply
|
Thread Tools | |
|
|